Section 700 - Operation Chapter 4. Key Telephone Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 4-93
2. Press the
CONF key.
“C” appears in the display.
3. Press
AUTO.
4. Press a System Speed Dial key.
The programmed data appears on the display.
5. Press the
ON/OFF key.
• The ON/OFF LED goes off.
• The date and time appear on the display.
Related Programming
• FF1 (System): Speed Dial Mode Setting (CPC-AII and CPC-B Version 7.0
and higher)
• FF1 (System): Override Toll Restriction With SSD Numbers
• FF10 (Speed Dialing): System Speed Dialing
Considerations
• If numbers do not appear on the display wh en you use System Speed Dial
codes (00-89 or 000-199), your extension is not programmed to display
that data.
• The system can be programmed to al low System Speed Dial Numbers to
override toll restrictions.
• You can make outside calls using this feature, even if your extension is
assigned toll restriction type 2-6.
• Speed Dial code cannot be chec ked while Station Lockout is activated.
• With CPC-AII and CPC-B Version 7.0 and higher, if the Speed Dial is
used to forward to an outside number and Least Cost Routing is enabled,
the Speed Dial cannot use Trunk Access “9.” Use trunk access 81-86
instead.