Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 5-13
To retrieve a call parked by the attendant (after receiving the park
number from the attendant):
1. Pick up the handset.
The phone issues intercom dial toned.
2. Dial “76.”
3. Enter the Park Number assigned to the call.
“PARK PICK XX” (where “XX” is the park number) appears, and then
“CO TALK #XX” (where “XX” is the trunk number of the call) appears.
Related Programming
• FF1 (System): Attendant Park Hold Recall Timer
• FF1 (System): Extension Park Hold Recall Timer
Considerations
• An alarm tone is issued if a parked call is not released before the Park
Recall Timer expires. If this happens, the user that parked the call can
retrieve it by picking up the handset. If no one retrieves the call after the
Park Recall Timer expires, a second alarm is issued at the attendant
phone(s).
• You cannot park more than one outside line at a time.
• The Call Park Recall Timer is similar to the Recall Timer, except that
when the Call Park Recall Timer is set for “0” a call automatically recalls
in three minutes.