Section 700 - Operation Chapter 4. Key Telephone Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 4-49
To assign Call Forwarding--External to an FF key (CPC-AII/CPC-B
prior to 7.0):
1. Press the
ON/OFF key.
2. Press the
PROG key.
3. Press the FF key to be programmed.
“Enter Code” appears on the display.
4. Enter “72.”
5. Press “3.”
6. Press the
AUTO key.
7. Enter the Speed Dial code (System Speed dial 00-89 or Personal Speed
dial 90-99 or 900-909).
Note: The speed dial code must include the CONF key (to indicate a
trunk call), the appropriate trunk access code, and the outside number.
8. Press the
HOLD key.
Intercom Calls will now be forwarded. CO incoming calls and transferred
CO calls will not be forwarded to an outside line.
To assign Call Forwarding--Outside to an FF key (CPC-AII/CPC-B
7.0 and later):
1. Press the
ON/OFF key.
2. Press the
PROG key.
3. Press the FF key to be programmed.
“Enter Code” appears on the display.
4. Enter “72.”
5. Dial the appropriate call forwarding code.
Call Forward Type Code
All 0
Busy/no answer 1
Busy 2
No answer 4