Section 700-Operation Appendix B. CPC-AII/B 8.0 Feature Update
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 Page B-15
MSG (Message) Key44-Series phones only
CPC-AII/B Version 8.0, CPC-S/M Version 2.0, or CPC-EX Version 1.0 only
Description The MSG key on the VB-44225 Large-Display Phone adds the following
functionality to the phone:
•Auto-Callback. If a callback message has been left by another
extension, you can press the MSG key to place an automatic callback to
the extension that sent the message. If more than one callback message
has been received, pressing the MSG key will perform auto-callback in
the order received.
•Auto-Answer Voice Message. You can press the MSG key to
automatically access your voice mailbox. The phone will dial your
voice mailbox and send access codes (if programmed) for retrieving
new messages.
Programming See Section 400 - Programming (Appendix D) for more detailed
programming information.
Operation To Program Voice Mailbox Access Codes into the MSG Key:
Press PROG MSG [16-digit number] HOLD
The display will reflect “Regist Data”.
To Confirm a V oice Mai lbox Ac ce ss Code P rogrammed into the
Message Key..
Press CONF MSG.
The programmed access code will be displayed.
Notes Operation With Message Waiting Indicator. The Message Waiting
Indicator on the phone’s upper right corner will flash whenever a callback
message or voice message has been received.
Operation During Call States. The MSG key will work only when the
phone is idle, receiving dial tone, or in Directory Mode (via select key).
Operation If Phone Has Both a Callback Message from another
Extension and a Voice Message. Messages are accessed in a First In, First
Out order. If the callback message was received before the voice message,
then pressing the MSG key will activate Auto-Callback first. Likewise, if