Chapter 4. Key Telephone Features Section 700 - Operation
4-60 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
2. Press the
REDIAL key.
The last number dialed appears on the display.
3. Complete the call and replace the handset.
The line key LED changes from green to red and then goes off.
Considerations
• If the Auto Flash Redial feature is set, you can flash the outside line once
by pressing the REDIAL key at the busy tone. You can then redial the last
number dialed.
• The Last Number Redial feature c an redial a number up to sixteen digits
long.
• A maximum of five chained Speed Dialing codes can be redialed. See
“One-Touch Keys” on page 4-74 for more information.
Line Appearances(All Versions)
The DBS provides up to four types of line appearances, depending on the
CPC version used.
The following table summarizes how each type of line appearance is used:
Table 4-7. MCO and ML key definitions
Key Definition
DSS/BLF Appear-
ances DSS/BLF keys provide one-touch dialing, direct station selection
(DSS), and busy lamp fields (BLF) for extensions.
Direct Line (DL)
Appearances DL keys are used to originate and receive calls over specific trunk
numbers.
Multi-CO (MCO)
Appearances MCO keys are used to originate and receive CO calls.
Multi-Line (ML)
Appearances ML keys are used to originate and receive CO line calls and intercom
calls.