Chapter 3. System Features Section 700 - Operation
Page 3-28 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
• While the Door Opener is functioning, a call from another Door Box on the
same door box adaptor cannot be answered.
Considerations
• The trunk connected to the Door Box Adaptor must be set to dial pulse.
Sensor(All Versions)
Description
The sensor is a device that detects when a circuit is opened or closed. Sensors
can be used to detect events such as the opening of windows or doors. When
the sensor is tripped, a tone sounds at a designated extension. Sensors are not
sold by Panasonic; they can be purchased separately from an electronics
dealer.
Hardware Requirements
The sensor is attached to the Door Box Adaptor (VB-43701).
Trunk lines connected to the Door Box Adaptor signal the designated
extension when the sensor is tripped.
Related Programming
• FF2 (Trunks): DTMF/Pulse Dialing for Trunks
• FF4 (Ring Assignments): CO Day Ring Assignments
• FF4 (Ring Assignments): CO Night Ring Assignments
Considerations
• The trunk connected to the sensor must be a dial-pulse trunk.