Chapter 6. SLT Features Section 700 - Operation
6-6 DBS M anual - Revised April 2000 DBS-2.3/9.2-700
Considerations
• You cannot break in on three-party conference calls.
• The default for the override a lert tone is “off.” If the override alert tone is
enabled, the tone will be sent to both parties when a call is overridden.
Call Forwarding
(All Versions)
Call Forwarding allows users to send their calls to another extension, to an
outside line, or to voice mail. All versions of the DBS provide call
forwarding; however, some call forwarding enhancements are not available
with earlier versions. The following table shows the call forwarding features
available with each release.
Table 6-3. DBS Call Forwarding features
Call Forwarding--All Calls. When this feature is activated, all incoming
calls to an extension are forwarded immediately.
Call Forwarding--No Answer. When this feature is activated, an
unanswered call rings until the Call Forward No Answer timer expires. When
the timer expires, the unanswered call is forwarded.
Feature Availability
Call Forwarding--All Calls All versions
Call Forwarding--No Answer CPC-AII and CPC-B Version 2.0
or higher
Call Forwarding--Busy All versions
Call Forwarding--Busy/No Answer All versions
Call Forwarding--External CPC-A, CPC-AII prior to 7.0 and
CPC-B prior to 7.0. Beginning
with CPC-AII and CPC-B Ver-
sion 7.0, all forwarding types (All
Calls, No Answer, Busy, Busy/
No Answer) allow call forward-
ing outside -- eliminating the
need for Call Forwarding--Exter-
nal.
Permanent Call Forwarding CPC-AII and CPC-B Version 3.1
or higher