Section 700 - Operation Chapter 4. Key Telephone Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 4-65
Multi-Line (ML) Appearances
(CPC-AII and CPC-B Version 2.0 or higher)
Description
You can make and receive both CO line calls and Intercom Calls using a
Multi-Line (ML) key. Each extension can have up to 24Multi-Line keys. The
Attendant can have up to 24 Multi-Line keys.
See “ML/MCO Separation” (page 4-66) for information on assigning both
ML and MCO keys to the same system (CPC-AII and CPC-B Version 4 or
higher).
Operation
Related Programming
• FF1 (System): Least Cost Routing (LCR) Access
• FF2 (Trunks): Pooled Trunk Access for Group “9”
• FF2 (Trunks): Pooled Trunk Access for Group “81-86”
• FF3 (Extension): Forced Least Cost Routing
• FF5 (Keys): FF Key Assignment (all)
• FF8 (LCR) LCR Settings (all)
Considerations
• A Multi-Line key will ring for incoming CO calls, Intercom Calls, recall
calls, and call-forward calls.
Operation Action
To originate a trunk call Press an idle ML key.
The key blinks (green) as the call is
made.
To place a call on Exclusive Hold (page 4-37) Press the ML key.
To place a call on System Hold (page 4-18) Press the HOLD key.
To transfer a call Press HOLD, dial the destination exten-
sion, then press PROG.