Patton electronic 6300 user manual View Port Information, Edit CPE Options

FS6300 NMS User Manual 7 • Configuring the 3196RC Card

4.Select an option from the Test Pattern drop-down menu. The Test Pattern parameter defines which test pattern the 3196RC will generate and transmit. The 3196RC will transmit the selected test pattern to the destination port defined by the option you selected for the Test Mode.

5.Click Modify to save your changes.

View Port Information

Click on iDSL Port Status and Statistics in the menu tree of the Port Configuration window to view erros and up times for the selected port.

Edit CPE Options

Click on Modify CPE Information in the menu tree of the Port Configuration window to edit the options for the CPE, such as the serial rate, DTE test mode, and front panel switches.

To edit the CPE options for a port:

1.Click on Modify CPE Options in the menu tree of the Port Configuration window.

2.Edit the desired, configurable options:

–Serial Rate: Select from the following: rate19-2k(0) for serial rate of 19200 bps rate32k(1) for serial rate of 32000 bps rate56k(1) for serial rate of 56000 bps rate64k(1) for serial rate of 64000 bps rate128k(1) for serial rate of 128000 bps rate144k(1) for serial rate of 144000 bps

–Front Panel Switches: Disable or enable front panel switches for the CPE.

–DTE Test Mode: Enable or disable the CPE from initiating and responding to test patterns.

–User ID: Enter a new User ID for the remote CPE.

3.Click Modify to save your changes.

Configuring iDSL Ports 112