Patton electronic 6300 user manual Configuring Clocking Synchronization

FS6300 NMS User Manual 3 • Configuring Alarms and Clocking

Configuring Clocking Synchronization

To configure clocking synchronization for a chassis:

1.From the menu tree on the left side of the screen, select Node (under Geographical Area).

2.In the main window, right-click on the chassis that you want to configure clocking for.

3.Select Chassis Clocking Synchronization from the pull-down menu.

Figure 39. Chassis Menu > Chassis Clocking Sync

The Chassis Clocking Synchronization window displays.

Figure 40. Modify System Clocking

4.Select Modify System Clocking from the menu tree on the left side of the screen.

5.Select a card from the Select Card drop-down menu, and select a clock from the Clock Reference drop- down menu. The Clock Reference can be Master(1), Secondary(2), or Slave(3). Click Submit.

6.Repeat Step 5 for each card in the chassis.

Note A chassis can have only one master and one secondary, so if you accidentally select another master in the same chassis, the NMS will not allow you to save the clock for that card as the Master.

Configuring Clocking Synchronization 53