Patton electronic 6300 Click the Hard Reset button, Set the factory default configuration

FS6300 NMS User Manual 4 • Configuring and Managing Devices

4.Click the Hard Reset button.

The Hard Reset process will reset ALL of the system’s values to the original factory settings. After resetting these values, the sys-

tem will continue to function the same until the system is reboo- IMPORTANT ted.

Set the factory default configuration

To set the factory default configuration for a device:

1.In the main menu tree under Network Maps, navigate to the Chassis or Card/Slot.

2.Right-click on the card’s icon in the main window and select Operator Action. The Reset Options win- dow appears. It shows the card model, IP address, and software revision of the card.

Figure 49. Set Factory Default Configuration

3.Select Set Factory Default Configuration from the menu tree in the Reset Options window.

4.Click the Set Factory Default Configuration button.

5.Click the Hard Reset button.

The Hard Reset process will reset ALL of the system’s values to the original factory settings. After resetting these values, the sys-

tem will continue to function the same until the system is reboo- IMPORTANT ted.

Managing Operator Actions 61