Patton electronic 6300 user manual Edit CO/CPE Options, To edit the CO/CPE options for a port

FS6300 NMS User Manual 6 • Configuring the 3096RC Card

Edit CO/CPE Options

Click on CO Options or CPE Options in the menu tree of the Port Configuration window to view the line provision rate, clock mode, payload rate, I-bits, annex type, transmit power, and EOC status.

Figure 77. 3096RC Edit CO Options

To edit the CO/CPE options for a port:

1.Click on Modify CO Options or Modify CPE Options in the menu tree of the Port Configuration win- dow.

2.Edit the desired, configurable options:

–Payload Rate: Select a rate fromt he drop-down menu. See “Determine Best Payload Rate” on page 91.

–Annex Type: Select Annex-Afor North America or Annex-Bfor outside North America.

–Transmit Power: Select a value between +1–6dB to -1–6dB from the drop-down menu.

–Enable EOC: Select Yes (to enable EOC) or No (to disable EOC) from the drop-down menu.

3.Click Modify to save your changes.

Configuring G.SHDSL Ports 90