FS6300 NMS User Manual | 7 • Configuring the 3196RC Card |
|
|
Add Routes
To add an IP route to the 3196RC:
1.In the IP Overview window for the 3196RC, click the Add button to define a new route.
Figure 100. Add a New Route for 3196RC
2.Enter a Destination address for the new route. An entry with a value of 0.0.0.0 is considered a default route.
3.Enter a Gateway address for the new route. The gateway address specifies the IP address where the packets should be forwarded.
4.Click Define Route.
Modify Routes
To modify an existing IP route for the 3196RC:
1.In the IP Overview window for the 3196RC, select the entry in the table of the route you want to modify.
Figure 101. Modifying a Route for 3196RC
2.The IP Route Details window displays. You may only modify the gateway address, cost, and state of the route.
3.Enter your desired changes and click Modify for each change. A confirmation message displays.
Configuring IP Routing | 115 |
