Unpacking / Inventory
Unpacking
The PAXAR printer is shipped in 2 large cardboard boxes, of which one may be difficult to move by hand.
DO NOT REMOVE THE PRINTER FROM THE BOX OR UNPACK IN THE
SHIPPING / RECEIVING DEPARTMENT.
NOTE: Unpacking in the shipping / receiving department is not recommended for
the following reasons. First: The cardboard carton in which your PAXAR printer was shipped allows the printer to be moved with a forklift, or handcart. Because of the weight of the printer, it is easier and safer to use one of these devices to move the printer to its intended installation location. Second: Leaving the printer in the carton while it is being moved within your facility will help to protect the printer during any movements to this location. Once the printer has reached its intended location you should begin the unpacking process.
Open the cardboard box from the top. Do not cut deep into the carton, as there are items located just under the top. Remove the items located on the top insert. Remove the top insert. Remove the printer from the box. Inspect the printer for shipping damage. If damage is discovered, contact PAXAR for further instructions - in the U.S.A. at
Shipping Cartons.
Save the shipping materials to relocate the printer or return to factory for service.
8 • Unpacking / Inventory | Users Manual Model 545™ |
