Inserting a PCMCIA Card
A PCMCIA card can be used to store fonts, logos, and operating system upgrades. To insert the card, make sure that the manufacturer’s name is facing the front of the machine. Insert the card so that the end with the holes goes in first. Slide the card in until it reaches the back of the slot and the eject button pops out. To eject the card push in the eject button and then pull the card out. Some machines will ship with a double slotted card option. If using a single IC card, the card must be inserted into the slot closest to the rear of the printer.
NOTE: The printer loads the data from the PCMCIA card at power up, after inserting a PCMCIA - power cycle the machine.
Eject
Button
16 • Printer Assembly | Users Manual Model 545™ |
