Paxar 545 user manual Stacker Label Length Adjustment, Stacker Angle Adjustment

Stacker Label Length Adjustment

•Loosen the “T” head thumbscrews on either side of the upright base.

•Slide the entire base to the desired position so that the cut label hangs over the last belt roller approximately ¼” (6mm)

Stacker Angle Adjustment

•Turn the lock knob counter-clockwise to allow the stack end of the stacker to rotate.

•Once the stack is so that the stacker rails are approximately 5° to 30° off horizontal, tighten the lock knob by turning it clock-wise.

30 • Printer Operation / Adjustments Users Manual Model 545™