CALIBRATE SENSORS
P | R | E | S | S |
| E | N | T | E | R |
| T | O |
|
|
|
|
|
|
|
|
|
|
C | A | L | I | B | R | A | T | E |
| S | E | N | S | O | R | S |
|
|
|
|
|
|
|
This screen follows the "PRINT HEAD CLEANING PROC" screen.
Pressing ENTER will take the user to the "CALIBRATE SENSORS" screens. Pressing the MODE / Down Arrow key will take the user to the "LIFE COUNTS/VERSIONS" screen. Pressing the EXIT / Up Arrow key will take the user back to the "HOME" screen.
H | O | L | E | / | S | L | O | T |
| I | N |
| S | E | N | S | O | R |
|
|
|
|
|
V | A | L | U | E | : | 0 | 0 | 0 |
| N | E | W |
| V | A | L | U | E | : | 0 | 0 | 0 |
|
This screen is the first screen under "CALIBRATING SENSORS" screen. Place the fabric hole/slot sense mark under the sensor. Slowly move the fabric under the sensor until the NEW VALUE reading is its lowest value then press ‘Enter’.
Pressing the MODE / Down Arrow key will take the user to the "HOLE/SLOT NOT IN SENSOR" screen. Pressing the EXIT / Up Arrow key will take the user back to the "HOME" screen.
H | O | L | E | / | S | L | O | T |
| N | O | T |
| I | N |
| S | E | N | S | O | R |
|
V | A | L | U | E | : | 0 | 0 | 0 |
| N | E | W |
| V | A | L | U | E | : | 0 | 0 | 0 |
|
This screen follows the "HOLE/SLOT IN SENSOR" screen. Place the fabric under the sensor so that it blocks the sensor and when NEW VALUE is at its highest value press ‘Enter’.
Pressing the MODE / Down Arrow key will take the user to the "TOP REFL OVER MARK" screen. Pressing the EXIT / Up Arrow key will take the user back to the "HOME" screen.
T | O | P |
| R | E | F | L |
| O | V | E | R |
| M | A | R | K |
|
|
|
|
|
|
V | A | L | U | E | : | 0 | 0 | 0 |
| N | E | W |
| V | A | L | U | E | : | 0 | 0 | 0 |
|
This screen follows the "HOLE / SLOT NOT IN SENSOR" screen. Place the fabric under the top reflective sensor so that the reflective mark is under the sensor and when NEW VALUE is at the highest value press ‘Enter’.
Pressing the MODE / Down Arrow key will take the user to the "TOP REFL NOT OVER MARK" screen. Pressing the EXIT / Up Arrow key will take the user back to the "HOME" screen.
T | O | P |
| R | E | F | L |
| N | O | T |
| O | V | E | R |
| M | A | R | K |
|
|
V | A | L | U | E | : | 0 | 0 | 0 |
| N | E | W |
| V | A | L | U | E | : | 0 | 0 | 0 |
|
This screen follows the "TOP REFL OVER MARK" screen. Place the fabric under the top reflective sensor so that the fabric is under the sensor but the reflective mark is not under the sensor and when NEW VALUE is at the lowest value press ‘Enter’.
Pressing the MODE / Down Arrow key will take the user to the "BOT REFL OVER MARK" screen. Pressing the EXIT / Up Arrow key will take the user back to the "HOME" screen.
Users Manual Model 545™ | Control Panel Operation • 49 |
