S | T | O | C | K |
| O | U | T |
| N | O | T |
| B | L | O | C | K | E | D |
|
|
|
V | A | L | U | E | : | 0 | 0 | 0 |
| N | E | W |
| V | A | L | U | E | : | 0 | 0 | 0 |
|
This screen follows the "STOCK OUT BLOCKED" screen. Reposition the fabric so that a splice is within the sensor site path and when NEW VALUE is at the lowest value press ‘Enter’.
Pressing the MODE / Down Arrow key will take the user back to the "HOLE / SLOT IN SENSOR" screen. Pressing the EXIT / Up Arrow key will take the user back to the "HOME" screen
LIFE COUNTS/VERSIONS
P | R | E | S | S |
| E | N | T | E | R |
| F | O | R |
|
|
|
|
|
|
|
|
|
L | I | F | E |
| C | O | U | N | T | S | / | V | E | R | S | I | O | N | S |
|
|
|
|
This screen follows the "CALIBRATE SENSORS" screen. Pressing ENTER will take the user to the "LIFE COUNTS/VERSIONS" screens.
Pressing the MODE / Down Arrow key will take the user to the "FEATURE SETUP" screen. Pressing the EXIT / Up Arrow key will take the user back to the "HOME" screen.
L | A | B | E | L |
| C | O | U | N | T | E | R | : | 0 | 0 | 0 | 0 | 0 | 0 |
|
|
|
|
P | R | E | S | S |
| E | N | T | E | R |
| T | O |
| R | E | S | E | T |
|
|
|
|
This screen is the first screen under "LIFE COUNTS / VERSIONS". This screen shows total labels produced since the last counter reset. Pressing the ENTER key will reset the counter to zero.
Pressing the MODE / Down Arrow key will take the user to the "TOTAL LABLES PRODUCED" screen. Pressing the EXIT / Up Arrow key will take the user back to the "HOME" screen.
T | O | T | A | L |
| L | A | B | E | L | S |
| P | R | O | D | U | C | E | D |
|
|
|
0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This screen follows the "LABEL COUNTER" screen. This screen displays the total labels produced since the printer was built. This counter is NOT resettable by the user.
Pressing the MODE / Down Arrow key will take the user to the "TOTAL INCHES OF STOCK" screen. Pressing the EXIT / Up Arrow key will take the user back to the "HOME" screen.
T | O | T | A | L |
| I | N | C | H | E | S |
| O | F |
| S | T | O | C | K |
|
|
|
0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This screen follows the "TOTAL LABELS PRODUCED" screen. This screen displays the total inches since the printer was built. This value is NOT resettable by the user.
Pressing the MODE / Down Arrow key will take the user to the "CONTROLLER VERSION" screen. Pressing the EXIT / Up Arrow key will take the user back to the HOME screen.
Users Manual Model 545™ | Control Panel Operation • 51 |
