Paxar 545 user manual Sensor Calibration

-10 +10

11)On the front panel adjust STATION 2 DOT SHIFT to cause station 2’s web print line to be directly over station 1’s web print line.

-16

+16

Sensor Calibration

The optical sensors used to detect error conditions in production can be calibrated without the use of a multi-meter via the front panel. One may need to be calibrated if it has just been replaced or put into service. Refer to the Front Panel Mode Descriptions under the Control Panel Operation section.

36 • Printer Operation / Adjustments Users Manual Model 545™