Control Panel Operation
Control Buttons
Start
-Starts the printer.
-ON LINE light must be GREEN. (Batches downloaded to be printed)
-If “Stopped For Splice” error condition exists: Fabric will be advanced until the splice is beyond the print stations. Labels between the heads and knife will be reproduced and stacked as finished labels.
Feed
-FEED and START must both be used.
-Feed will stop when the buttons are released.
-Labels between the heads and knife will be cut and stacked as finished labels.
-Fabric moves through in one continuous strip.
-Fabric moves through without printing.
Test
-TEST and START must both be used.
-Test will stop when the buttons are released.
-Labels between the heads and knife will be cut and stacked as finished labels.
-Fabric moves through in one continuous strip.
Users Manual Model 545™ | Control Panel Operation • 37 |
