P | R | I | N | T |
| P | O | S | I | T | I | O | N |
| S | T | A | T | I | O | N |
| 2 |
V | A | L | U | E | : | ± | X | X |
|
| N | E | W |
| V | A | L | U | E | : | ± | Y | Y |
This screen follows the "PRINT POSITION STATION 1" screen. This screen allows the print position of station 2 to be adjusted in the feed direction.
The <YES / NO> buttons are used to change the new print position value. The value is displayed in a positive / negative format. The value ranges for XX and YY can be from a
Pressing the MODE / Down Arrow key will take the user to the "PRINT OFFSET STATION 1" screen. Pressing the EXIT / Up Arrow key will take the user back to the "HOME" screen.
P | R | I | N | T |
| O | F | F | S | E | T |
| S | T | A | T | I | O | N |
| 1 |
|
|
V | A | L | U | E | : | ± | X | X |
|
| N | E | W |
| V | A | L | U | E | : | ± | Y | Y |
This screen follows the "PRINT POSITION STATION 2" screen. This screen allows the offset print position of station 1 to be adjusted.
The <YES / NO> buttons are used to change the new print offset value. The value is displayed in a positive / negative format. The value ranges for XX and YY can be from a
Pressing the MODE / Down Arrow key will take the user to the "PRINT OFFSET STATION 2" screen. Pressing the EXIT / Up Arrow key will take the user back to the "HOME" screen.
P | R | I | N | T |
| O | F | F | S | E | T |
| S | T | A | T | I | O | N |
| 2 |
|
|
V | A | L | U | E | : | ± | X | X |
|
| N | E | W |
| V | A | L | U | E | : | ± | Y | Y |
This screen follows the "PRINT OFFSET STATION 1" screen. This screen allows the offset print position of station 2 to be adjusted.
The <YES / NO> buttons are used to change the new print offset value. The value is displayed in a positive / negative format. The value ranges for XX and YY can be from a
Pressing the MODE / Down Arrow key will take the user to the "CHANGE CUT POSITION" screen. Pressing the EXIT / Up Arrow key will take the user back to the "HOME" screen.
46 • Control Panel Operation | Users Manual Model 545™ |