
Stacker Full Level Adjustment
•To change the height at which the machine will stop, first loosen the plastic thumbscrew located on the stacker upright and slide it up or down.
•Once the desired stop level is reached retighten the thumbscrew.
•Do not bring the thumbscrew in contact with the top of the slot. The thumbscrew must be able to move up approximately 3/16” for the switch to be activated and stop the printer.
•Note: Not all material and or label sizes will reach the top of the stacker. Set the stacker full level accordingly.
Users Manual Model 545™ | Printer Operation / Adjustments • 31 |