Manuals / Raymarine / Marine Equipment / Marine GPS System

Raymarine 300 manual Maintenance & Fault Finding, Appendix A Technical Summary, Index

Models: 300

1 136

Page 10

5.2	Unpacking and Inspecting the Components	5-3
	Items Missing?	5-3
	Registering this Product	5-3
5.3	GPS Antenna Installation	5-4
	Surface Mounting	5-4
	Pole Mounting	5-6
5.4	Plotter Installation	5-7
	Trunnion (yoke) Mounting	5-8
	Panel Mounting	5-9
5.5	Connecting to Other Equipment	5-10
5.6	Cable Running	5-11
	Introduction	5-11
	Connectors	5-11
5.7	System Check and Initial Switch On	5-14
	EMC Conformance	5-14
	System Check	5-14
	Initial Switch On	5-15
	Checking the Plotter Operation	5-15
Chapter 6: Maintenance & Fault Finding		6-1
6.1	Maintenance	6-1
	Routine Checks	6-1
	EMC Servicing and Safety Guidelines	6-1
	Disposal	6-2
6.2	Resetting the System	6-2
6.3	Problem Solving	6-3
Appendix A: Technical Summary		A-1
Appendix B: SeaTalk and NMEA Data		B-1
Appendix C: List of Abbreviations		C-1
GPS Antenna Mounting Template		T-1
Raynav 300 GPS Plotter Mounting Template		T-3
Index		xi

Page 10

Image 10

Raymarine 300 manual Maintenance & Fault Finding, Appendix A Technical Summary, Appendix B SeaTalk and NMEA Data, Index

Contents

Raynav 300 GPS Plotter Owner’s HandbookPage WAAS Satellite Differential GPS SAFETY NOTICESRaynav 300 GPS Plotter Owner’s Handbook Prelim PagesExtended Offshore Coverage Availability of the WAAS System in North AmericaFigure i The WAAS System Accuracy and Continuation of Broadcast Coverage Coverage Outside of North AmericaFigure ii WAAS Coverage Map EMC Conformance WarrantyPreface Technical AccuracySAFETY NOTICES Contents - Raynav 300 PlotterChapter ChapterChapter Using the Route List to Erase or Name a RouteOperation Chapter Setting Up the GPS PlotterInstallation ChapterAppendix B SeaTalk and NMEA Data Chapter 6 Maintenance & Fault FindingAppendix A Technical Summary Appendix C List of Abbreviations1.1 Introduction Chapter 1 OverviewHow this Handbook is Organized Display 1.2 FeaturesGeneral Display ModesPlotter Functions 1.3 The Plotter DisplayDisplay Functions 1.4 Operating Controls GPS Data PagesTrackpad and Cursor Moving the CursorDedicated Keys Context-Sensitive Cursor ControlPop-Up Menus ALARMS SET UPSoft Keys Note If the key text is greyed out, it is not currently availablePOSITION Database ListsWAYPOINT LIST 348 m2.1 Introduction 2.2 Power On/OffChapter 2 Getting Started Conventions Used1.0 D-FIX SD-FIXGPS STATUS STEER STARBOARDNote Factory default settings are LIGHT OFF and CONTRAST 50% Changing the Lighting and ContrastSelecting the Display Mode 2.3 Controlling the Display00106000W Figure 2-5 Display Modes5050000W Chapter 2 Getting StartedMoving Around the Plotter Screen Using FIND SHIP2.4 Plotter Display Control Functions Panning the DisplayChanging the Display Center Changing the Display ScaleSwitching the Cursor Data Box On/off Customizing the Display OptionsSimulator Mode Switching Grid On/off2-10 Raynav 300 GPS PlotterChapter 3 Operation 3.2 Changing the Display Mode3.1 Introduction Data Display Pages 050 M 320 M0.55 nm 12.0 kts050M 320M0.55nm 12.0ktsRNG 0.55 nm 0.06 nm01 h00 m 133400DEPTH 12.5 m BRG 320MRNG 0.55nm SPEED 11kts0.05nm AUTOLOCK 323M DEPTH 12.5MEnvironment Data WIND TRUEWIND APP Figure 3-11 Environment Data #123.2nm 0.05nm300T CDI/BDI Data104018 17kts 124T 28.7nm 124T MANUALData Boxes 0.05nmData Log TIMEPOSITION 3.3 Working with Waypoints IntroductionPOSITION Placing a WaypointWAYPOINT LIST 348 mRNG 12.6 nm NEW WAYPOINT124 m Figure 3-19 New Waypoint ScreenFigure 3-20 Waypoint Position Screen Loran TDs WPT POSITION LORAN TDs3-15 Figure 3-21 Select Chain/Slaves ScreenSelecting a Waypoint Figure 3-23 Waypoint Soft KeysEditing Waypoint Details Waypoint Data DisplayNote The ERASE WPT soft key is only available via the Waypoint List Figure 3-25 Waypoint Symbol Selection D49091Erasing a Waypoint Moving a WaypointUsing the ST60 or ST80 Navigator Keypad Figure 3-26 ST80 Navigator KeypadSelecting an Entry in the Waypoint List Editing Entries in the Waypoint, Route, or Track ListsTo edit an item in a list using the Navigator Keypad 3.4 Working with Routes WAYPOINTS Figure 3-27 Default Soft Keys TypicalCreating a New Route NEW ROUTETo make a new route by placing waypoints using the cursor Figure 3-31 Make Route Soft Keys D4928-1Saving the Current Route SAVE ROUTEFull Route Details Displaying Route InformationROUTE LIST INFO FOR ROUTE - NEW ROUTE Route Leg and Waypoint Information Clearing the Current Route from the ScreenCLEAR D4961-1 D4915-1Using the Route List to Erase or Name a Route Retrieve a Route from the DatabaseInserting a Waypoint into a Route Editing a RouteAdding/Removing Waypoints at the End of the Route Reversing the Route Removing a Waypoint from within the Routei. Press REVERSE ROUTE Going To an Individual Target Point 3.5 Following Routes and Going to WaypointsNote The soft keys differ if a follow or goto is already in progress LOWING ROUTE. CANCEL ROUTE AND GOTO CURSOR? Follow a RouteOther Follow Route Options Note You cannot remove a waypoint from a route if it is the targetJoining a Route Restart Cross Track Error XTEStop Follow or Stop Goto Advancing to a WaypointTarget Point Arrival Transferring Database Lists 3.6 Transferring Waypoints and RoutesDisplayed SeaTalk Waypoints Receiving Waypoints from Other Equipment3.7 Using Tracks Sending Waypoints to Other EquipmentSetting Up a Track Figure 3-41 Track Interval Setting GuideClearing the Current Track Managing Tracks SmartRouteSaving and Naming the Current Track Naming, Erasing and Showing a Track 0.33 nm 3.8 Man Overboard MOBMOB DR 162 T3.9 Alarms & Timers External AlarmsFigure 3-47 Alarms Set Up Menu Setting Alarms and TimersALARMS SET UP 3.10 Cursor Echo 3-50 Raynav 300 GPS PlotterTrack, detailed in Using Tracks on page Chapter 4 Setting Up the GPS Plotter4.1 Introduction 4.2 Changing the Set Up Parameters Figure 4-1 Set Up Soft KeysChapter 4 Setting Up the GPS Plotter 4.3 System Set Up ParametersTable 4-1 System Set Up Parameters DefaultTable 4-1 System Set Up Parameters Continued Bearing ModeCursor Reference Day/Night Note The alarms continue to soundCursor Readout HelpAutopilot Pop Up Menu Timeout PeriodAuto Mode UnitsManual Mode NMEA OUT Set UpDate and Time Settings Note The remote display must have SeaTalk Cursor Out enabledNMEA Input GPS SourceGPS SOG/COG Filter LanguageChart Orientation 4.4 Plotter Set Up ParametersTable 4-2 Plotter Set Up Parameters Waypoint Numbers Waypoint SymbolsDefault Waypoint Symbol VectorsPosition Offset Datum SelectionGPS STATUS 4.5 GPS Set UpFix Mode 1.0 D-FIXD-GPS Set Up DIFFERENTIAL GPS SET UPBeacon ID D-GPS ModeSignal Strength and Signal to Noise Ratio Beacon FrequencyRestart GPS Differential Age4-16 Raynav 300 GPS PlotterEMC Installation Guidelines Chapter 5 Installation5.1 Introduction Connections to Other Equipment Suppression FerritesFigure 5-1 Typical Suppression Ferrites Items Missing? System Parts and Accessories5.2 Unpacking and Inspecting the Components Registering this Product5.3 GPS Antenna Installation Surface MountingUnderside view Top viewD47251 Pole Mounting Figure 5-3 Pole Mounting Arrangement5.4 Plotter Installation Trunnion yoke Mounting Figure 5-4 Raynav 300 GPS Plotter DimensionsRaynav 300 GPS Plotter Panel Mounting Note The gasket must be fitted to ensure EMC compliance5.5 Connecting to Other Equipment Figure 5-5 Panel Mounting5.6 Cable Running ConnectorsIntroduction PWR/NMEA Connector Antenna ConnectorThis unit is not intended for use on positive ground vessels Function Table 5-2 Power/NMEA ConnectionsColor System Check 5.7 System Check and Initial Switch OnSeaTalk Connector EMC ConformanceSYSTEM SET UP MENU Initial Switch OnChecking the Plotter Operation 5-16 Raynav 300 GPS PlotterEMC Servicing and Safety Guidelines Chapter 6 Maintenance & Fault Finding6.1 Maintenance Routine Checks6.2 Resetting the System Disposal6.3 Problem Solving Note The factory default settings are listed in ChapterRaynav 300 GPS Plotter Feature Appendix A Technical SummaryAppendix A Technical Summary DescriptionDescription FeatureBuilt in Lithium battery giving ~5 years From a PC serial port via the NMEA interData Received Appendix B SeaTalk and NMEA DataAppendix B SeaTalk and NMEA Data SourceSeaTalk The following data, if available, are transmitted on the SeaTalk portData Output NMEA OutAbbreviation Appendix C List of AbbreviationsAppendix C List of Abbreviations MeaningRaynav 300 GPS Plotter SiRF LICENSE AGREEMENT IMPORTANT - READ CAREFULLY 3. LIMITED WARRANTY REMEDIES DISCLAIMER LIMITATION OF LIABILITYPage Installation Templates GPS Antenna Mounting TemplateRaynav 300 Plotter Cut out shaded area only Raynav 300 GPS Plotter Mounting TemplateInstallation Templates 300/320 TemplateRaynav 300 GPS Plotter Index see also WAAS EMC see also WAAS Managing Page Page Page Installed Warranty Warranty CertificateLimited Warranty Obtaining Warranty ServiceWarranty Limitations United States of America Factory Service CentersSales & Order Services UK, Europe, Middle East, Far East

Chapter 6: Maintenance & Fault Finding

Appendix A: Technical Summary

Appendix B: SeaTalk and NMEA Data

Appendix C: List of Abbreviations

GPS Antenna Mounting Template

Raynav 300 GPS Plotter Mounting Template

Index