Raymarine 300 manual Placing a Waypoint, Waypoint List, Position, 348 m, 1.00 nm

Chapter 3: Operation 3-13

At the end is a section about using the ST60/80 Navigator Keypad to select, edit and name your waypoints.

Placing a Waypoint

➤To access the Place Waypoint soft keys, press MARK; the Place Waypoint soft keys are displayed as shown in Figure 3-17:

PLACE WPT	PLACE WPT	WAYPOINT
AT CURSOR	AT VESSEL	LIST

D4905-1

Figure 3-17: Waypoint Soft Keys

➤To place a waypoint at the cursor (plotter screen) or the vessel’s current position:

1.Press either the PLACE WPT AT CURSOR or the PLACE WPT AT VESSEL soft key. The waypoint is added to the Waypoint List and tagged using the next available number.

If you place a waypoint at the cursor, the Waypoint soft keys shown in Figure 3-23are shown. Press CLEAR to remove these softkeys.

2.Press CLEAR to remove the Place Waypoint soft keys.

➤To place a waypoint as a latitude/longitude position using the Waypoint List:

1.Press MARK, followed by the WAYPOINT LIST soft key; the Waypoint List and associated soft keys are displayed as shown in Figure 3-18:

WAYPOINT LIST

		SYMBOL					NAME
						WPT 001
						WPT 002
						WPT 003
						WPT 004
	POSITION					N	50°50^000
						W 001°06^000
	BRG		348°m		RNG		1.00nm
	TEMP			20°C	DEPTH 12.3m
	DATE	23/11/01			TIME		08:45:12
GOTO				EDIT		MAKE NEW		WAYPOINT
WAYPOINT				WAYPOINT		WAYPOINT		TRANSFER

D4906-2

Figure 3-18: Waypoint List and Soft Keys

The list details all waypoints in alpha-numerical order. The selected waypoint is indicated by the highlight bar; its position in Lat/Long,