Naming, Erasing and Showing a Track | Raymarine 300 specs

Chapter 3: Operation

3-45

NAME TRACK?

YES NO

D4922-1

Figure 3-45: Name Track Soft Keys

4.To name the route press the YES soft key.

i.Use the trackpad left/right to select the character you wish to edit and the trackpad top/bottom to change the character.

ii.Press ENTER to finish and clear the Track List.

5.To save the unnamed track, press the NO soft key to clear the list. The track is saved and is listed as TRACK NOT NAMED.

6.Press ENTER to finish and clear the Track List.

7.To return to the Track soft key display, press CLEAR.

8.To return to the default soft key display, press CLEAR again.

Naming, Erasing and Showing a Track

➤To name an existing track, erase a track or show a track:

1.Press the TRACK LIST soft key; the Track List is displayed. The highlight indicates the selected track.

2.Using the trackpad top/bottom, select the required track and press the

SAVE TRACK, NAME TRACK or ERASE TRACK soft key.

3.To NAME a track, use the trackpad left/right to select the character you wish to edit and the trackpad top/bottom to change the character.

4.Press ENTER to finish the operation or CLEAR to cancel the name.

5.To ERASE a track you are prompted to confirm:

i.Press NO to cancel the operation, then ENTER if you wish to remove the Track List.

ii.Press YES to erase the track from the Track List, then ENTER to remove the Track List.

6.If you select SHOW a track when a current, unsaved track is displayed, you are prompted to save the current track. Proceed as described in Clearing the Current Track on page 3-43or press the NO soft key to cancel the operation.

The Track List is removed and the selected track is displayed.

Image 73

Raymarine 300 manual Naming, Erasing and Showing a Track, Save TRACK, Name Track or Erase Track soft key

Contents

Raynav 300 GPS Plotter Page Waas Satellite Differential GPS Raynav 300 GPS Plotter Owner’s Handbook Extended Offshore Coverage Availability of the Waas System in North America Accuracy and Continuation of Broadcast Coverage Coverage Outside of North AmericaPrelim Pages Preface WarrantyEMC Conformance Technical Accuracy Contents Raynav 300 Plotter Viii Prelim Pages Maintenance Routine Checks How this Handbook is Organized Introduction General FeaturesDisplay Display Modes Plotter Functions Plotter DisplayDisplay Functions GPS Data Pages Operating Controls Moving the Cursor Trackpad and Cursor Dedicated Keys Text Label FeatureContext-Sensitive Cursor Control Pop-Up Menus Soft Keys Waypoint List Database Lists Conventions Used Power On/OffSimulator 5050000N WPT RNG 00106000W 0.55nm 42% 60% Changing the Lighting and Contrast Controlling the Display Selecting the Display Mode Speed 11kts 320M Depth 12.5m 55nm050M 12.0ktsDATA Plotter Display Control Functions Using Find ShipMoving Around the Plotter Screen Panning the Display Changing the Display Scale Changing the Display Center Customizing the Display Options Switching the Cursor Data Box On/off Switching Grid On/off Simulator Mode Raynav 300 GPS Plotter Operation Changing the Display Mode Data Display Pages GPS Data GPS/Waypoint Data 123400 Waypoint Data RNG 0.55 nm Boat Data Boat/Environment Data Auto Environment Data Kts CDI Data CDI/BDI DataBDI Data Data Boxes 300T Data Log CMG Introduction Working with Waypoints 17 Waypoint Soft Keys Placing a Waypoint NEW Waypoint WPT Position Loran TDs 23 Waypoint Soft Keys Selecting a Waypoint Editing Waypoint Details Waypoint Data Display 25 Waypoint Symbol Selection Moving a Waypoint Erasing a Waypoint 26 ST80 Navigator Keypad Using the ST60 or ST80 Navigator Keypad Selecting an Entry in the Waypoint List Raynav 300 GPS Plotter Working with Routes NEW Route Creating a New Route 30 Route Soft Keys 31 Make Route Soft Keys Save Route Saving the Current Route Full Route Details Displaying Route Information Info for Route NEW Route Route Leg and Waypoint Information Clearing the Current Route from the Screen 37 Stop Follow Soft Keys Retrieve a Route from the Database Using the Route List to Erase or Name a Route Inserting a Waypoint into a Route Editing a RouteAdding/Removing Waypoints at the End of the Route Reversing the Route Removing a Waypoint from within the Route Going To an Individual Target Point Following Routes and Going to Waypoints Follow a Route Lowing ROUTE. Cancel Route and Goto CURSOR? Press the Follow Route soft key Other Follow Route Options Stop Follow or Stop Goto Restart Cross Track Error XTEJoining a Route Advancing to a Waypoint Target Point Arrival Displayed SeaTalk Waypoints Transferring Waypoints and RoutesTransferring Database Lists Receiving Waypoints from Other Equipment Sending Waypoints to Other Equipment Using Tracks 41 Track Interval Setting Guide Setting Up a Track Clearing the Current Track 42 Set Up Soft Keys Managing Tracks SmartRouteSaving and Naming the Current Track Save TRACK, Name Track or Erase Track soft key Naming, Erasing and Showing a Track 2nm Man Overboard MOB External Alarms Alarms & TimersAlarmIndicates 47 Alarms Set Up Menu Setting Alarms and Timers Cursor Echo Raynav 300 GPS Plotter Setting Up the GPS Plotter To set the default parameters Changing the Set Up Parameters Factory New Menu Options Default System Set Up Parameters Cursor Reference Bearing Mode Day/Night Cursor ReadoutHelp Key Beep Auto Mode Menu Timeout PeriodAutopilot Pop Up Units Date and Time Settings Nmea OUT Set UpManual Mode Cursor Echo GPS SOG/COG Filter GPS SourceNmea Input Language Chart Orientation Plotter Set Up ParametersFactory New Parameter Options Default Default Waypoint Symbol Waypoint SymbolsWaypoint Numbers Vectors Datum Selection Position Offset Fix Mode GPS Set Up Differential GPS SET UP GPS Set Up Signal Strength and Signal to Noise Ratio GPS ModeBeacon ID Beacon Frequency Differential Age Restart GPS Raynav 300 GPS Plotter EMC Installation Guidelines Installation Connections to Other Equipment Suppression Ferrites Items Missing? Unpacking and Inspecting the ComponentsRegistering this Product Supplied with Surface Mounting GPS Antenna Installation Surface Mounting Arrangement Refer to Figure Pole Mounting Plotter Installation Trunnion yoke Mounting Raynav 300 GPS Plotter Dimensions Panel Mounting Panel Mounting Connecting to Other Equipment Cable Running Connectors PWR/NMEA Connector Antenna Connector Function Color Maximum Power Cable Extension Lengths SeaTalk Connector System Check and Initial Switch OnSystem Check Checking the Plotter Operation Initial Switch On Raynav 300 GPS Plotter EMC Servicing and Safety Guidelines MaintenanceRoutine Checks Power-on Setting Resetting the SystemDisposal Problem Corrective Action Problem Solving Raynav 300 GPS Plotter Appendix a Technical Summary Feature Description Face Memory Capacity Data Received Source Appendix B SeaTalk and Nmea Data RMB, APB, BWC, BWR Data Output SeaTalk Nmea Out Abbreviation Meaning Appendix C List of Abbreviations Raynav 300 GPS Plotter Important Read Carefully Page GPS Antenna Mounting Template Raynav 300 Plotter 03 in 102.3 mm Cut out shaded area only Raynav 300 GPS Plotter Index Xii See also Waas Managing Xiv Waas Xvi Limited Warranty Warranty Certificate Warranty Limitations Factory Service Centers