Raymarine 300 manual 124 m, RNG 12.6 nm, 19 New Waypoint Screen, Position

3-14 Raynav 300 GPS Plotter

bearing and range, date, time and, if placed at vessel, depth and tem- perature (if available) are shown.

2.Press the MAKE NEW WAYPOINT soft key; the New Waypoint screen is displayed, together with its associated soft keys, see Figure 3-19.

NEW WAYPOINT

		SYMBOL				NAME
						WPT 005
	POSITION				N 50°50^000
					W 001°06^000W
	BRG		124°m		RNG 12.6nm
SYMBOL				NAME		LAT/LONG	LORAN TDs

D5518-1

Figure 3-19: New Waypoint Screen

3.The new waypoint is listed at the vessel’s current position or, if not available, the cursor’s current position; The waypoint is named with the next available number.

If required, edit the waypoint using the LAT/LONG, SYMBOL and NAME soft keys. Operation of these soft keys is identical to the SYM- BOL, NAME and POSITION soft keys described in Editing Waypoint Details on page 3-17.

4.When editing is complete, press ENTER to place the waypoint in the waypoint list (or CLEAR to abort the operation).

5.When complete, press CLEAR as required to exit to the default dis- play.

➤To place a waypoint as Loran TDs:

1.Press MARK, followed by the WAYPOINT LIST soft key; the Waypoint List and associated soft keys are displayed as shown previously (Figure 3-18):

2.Press the MAKE NEW WAYPOINT followed by the LORAN TDs soft key; the WPT POSITION (LORAN TDs) screen is displayed, together with it’s associated soft keys, see Figure 3-20.