Autopilot Pop Up, Menu Timeout Period, Units | Raymarine 300

4-6	Raynav 300 GPS Plotter

Autopilot Pop Up

This option controls whether or not the autopilot pop up is displayed. When set to ON, if the status and locked heading of the autopilot changes, they are displayed in a pop up box. The box is removed from the display after two seconds.

When Autopilot Pop Up is set to OFF, the pop up box disabled.

Menu Timeout Period

With no time-out set, menus and soft key labels remain displayed until you clear them by pressing ENTER, CLEAR or the appropriate dedicated key.

Units

You can set the units for speed, depth and temperature. The units set will be used to display all data, including information received from other instruments on the system. However, the distance units do not affect the instrumented range of the display, which is always in nautical miles.

Variation Source

The variation value is the difference between True and Magnetic direction data for heading or bearing values. The Variation Source option provides soft keys for selecting Auto or Manual variation mode, displays the current variation value for each and highlights the currently selected mode.

Auto Mode

If Auto mode is selected, the value of variation is obtained automatically, normally from received data. The variation value that is used depends on the data available, and is selected in the following order of priority:

1.Variation value from the same source as the heading data:

If heading data is being taken from NMEA, then variation is also taken from NMEA.

If heading is taken from SeaTalk, then SeaTalk variation is used.

2.Variation value from a different source:

If heading data is being taken from NMEA, but no NMEA variation is available, then variation is taken from SeaTalk.

If heading is taken from SeaTalk, but no SeaTalk variation is avail- able, then variation is taken from NMEA.

3.A calculated variation value, using position data, if no SeaTalk or NMEA value is available.

Image 84

Raymarine 300 manual Autopilot Pop Up, Menu Timeout Period, Units, Variation Source, Auto Mode

Contents

Raynav 300 GPS Plotter Page Raynav 300 GPS Plotter Owner’s Handbook Waas Satellite Differential GPS Availability of the Waas System in North America Extended Offshore Coverage Coverage Outside of North America Accuracy and Continuation of Broadcast CoveragePrelim Pages Warranty PrefaceEMC Conformance Technical Accuracy Contents Raynav 300 Plotter Viii Prelim Pages Maintenance Routine Checks Introduction How this Handbook is Organized Features GeneralDisplay Display Modes Plotter Display Plotter FunctionsDisplay Functions Operating Controls GPS Data Pages Trackpad and Cursor Moving the Cursor Text Label Feature Dedicated KeysContext-Sensitive Cursor Control Soft Keys Pop-Up Menus Database Lists Waypoint List Power On/Off Conventions UsedSimulator 5050000N WPT RNG 00106000W 0.55nm Changing the Lighting and Contrast 42% 60% Selecting the Display Mode Controlling the Display 320M Depth 12.5m 55nm Speed 11kts050M 12.0ktsDATA Using Find Ship Plotter Display Control FunctionsMoving Around the Plotter Screen Panning the Display Changing the Display Center Changing the Display Scale Switching the Cursor Data Box On/off Customizing the Display Options Simulator Mode Switching Grid On/off Raynav 300 GPS Plotter Changing the Display Mode Operation Data Display Pages GPS/Waypoint Data GPS Data 123400 RNG 0.55 nm Waypoint Data Boat/Environment Data Boat Data Auto Kts Environment Data CDI/BDI Data CDI DataBDI Data 300T Data Boxes CMG Data Log Working with Waypoints Introduction Placing a Waypoint 17 Waypoint Soft Keys NEW Waypoint WPT Position Loran TDs Selecting a Waypoint 23 Waypoint Soft Keys Waypoint Data Display Editing Waypoint Details 25 Waypoint Symbol Selection Erasing a Waypoint Moving a Waypoint Using the ST60 or ST80 Navigator Keypad 26 ST80 Navigator Keypad Selecting an Entry in the Waypoint List Raynav 300 GPS Plotter Working with Routes Creating a New Route NEW Route 30 Route Soft Keys 31 Make Route Soft Keys Saving the Current Route Save Route Displaying Route Information Full Route Details Info for Route NEW Route Clearing the Current Route from the Screen Route Leg and Waypoint Information 37 Stop Follow Soft Keys Using the Route List to Erase or Name a Route Retrieve a Route from the Database Editing a Route Inserting a Waypoint into a RouteAdding/Removing Waypoints at the End of the Route Removing a Waypoint from within the Route Reversing the Route Following Routes and Going to Waypoints Going To an Individual Target Point Lowing ROUTE. Cancel Route and Goto CURSOR? Follow a Route Other Follow Route Options Press the Follow Route soft key Restart Cross Track Error XTE Stop Follow or Stop GotoJoining a Route Advancing to a Waypoint Target Point Arrival Transferring Waypoints and Routes Displayed SeaTalk WaypointsTransferring Database Lists Receiving Waypoints from Other Equipment Using Tracks Sending Waypoints to Other Equipment Setting Up a Track 41 Track Interval Setting Guide 42 Set Up Soft Keys Clearing the Current Track SmartRoute Managing TracksSaving and Naming the Current Track Naming, Erasing and Showing a Track Save TRACK, Name Track or Erase Track soft key Man Overboard MOB 2nm Alarms & Timers External AlarmsAlarmIndicates Setting Alarms and Timers 47 Alarms Set Up Menu Cursor Echo Raynav 300 GPS Plotter Setting Up the GPS Plotter Changing the Set Up Parameters To set the default parameters System Set Up Parameters Factory New Menu Options Default Bearing Mode Cursor Reference Cursor Readout Day/NightHelp Key Beep Menu Timeout Period Auto ModeAutopilot Pop Up Units Nmea OUT Set Up Date and Time SettingsManual Mode Cursor Echo GPS Source GPS SOG/COG FilterNmea Input Language Plotter Set Up Parameters Chart OrientationFactory New Parameter Options Default Waypoint Symbols Default Waypoint SymbolWaypoint Numbers Vectors Position Offset Datum Selection GPS Set Up Fix Mode GPS Set Up Differential GPS SET UP GPS Mode Signal Strength and Signal to Noise RatioBeacon ID Beacon Frequency Restart GPS Differential Age Raynav 300 GPS Plotter Installation EMC Installation Guidelines Suppression Ferrites Connections to Other Equipment Unpacking and Inspecting the Components Items Missing?Registering this Product Supplied with GPS Antenna Installation Surface Mounting Surface Mounting Arrangement Pole Mounting Refer to Figure Plotter Installation Raynav 300 GPS Plotter Dimensions Trunnion yoke Mounting Panel Mounting Connecting to Other Equipment Panel Mounting Connectors Cable Running Antenna Connector PWR/NMEA Connector Maximum Power Cable Extension Lengths Function Color System Check and Initial Switch On SeaTalk ConnectorSystem Check Initial Switch On Checking the Plotter Operation Raynav 300 GPS Plotter Maintenance EMC Servicing and Safety GuidelinesRoutine Checks Resetting the System Power-on SettingDisposal Problem Solving Problem Corrective Action Raynav 300 GPS Plotter Feature Description Appendix a Technical Summary Face Memory Capacity Appendix B SeaTalk and Nmea Data Data Received Source Data Output SeaTalk Nmea Out RMB, APB, BWC, BWR Appendix C List of Abbreviations Abbreviation Meaning Raynav 300 GPS Plotter Important Read Carefully Page GPS Antenna Mounting Template Raynav 300 Plotter Cut out shaded area only 03 in 102.3 mm Raynav 300 GPS Plotter Index Xii See also Waas Managing Xiv Waas Xvi Warranty Certificate Limited Warranty Warranty Limitations Factory Service Centers