Raymarine 300 manual Saving the Current Route, Save Route

Chapter 3: Operation 3-27

Saving the Current Route

You can save up to 20 named routes in the Route Database List. These routes can then be re-displayed and followed at a later date. When you save the route, all new waypoints are saved in the Waypoint List.

Note: When a change to this route is attempted, eg. CLEAR ROUTE and the current route has not been saved, you are prompted to save it.

➤To save and name the current route:

1.Press the ROUTE soft key followed by MORE to access the SAVE ROUTE soft key.

2.Press the SAVE ROUTE soft key. The Save Route List and the NAME ROUTE soft keys are displayed as shown in Figure 3-32with the next available entry on the Route List highlighted.

SAVE ROUTE

CURRENT

1ALDERNEY-SOLENT

2COWES-PORTSMOUTH

3BRAYE-CHERBOURG

4 HOME TO COWES

5 NO NAME

NAME ROUTE?

YES NO

D4911-1

Figure 3-32: Save Route Soft Keys

Note: The trackpad up/down can be used to select another position in the list; this can be an empty position or an existing route that you no longer require.

3.If you do not wish to name or re-name the route, press the NO soft key to clear the list. The route is saved and is listed as ROUTE NOT NAMED.

4.To name the route press the YES soft key. Use the trackpad to move the cursor right or left to the character you wish to edit. Then use the top or bottom of the trackpad to increase or decrease the letter or number.

5.Press ENTER to finish and clear the Name List, or press CLEAR to cancel the operation. To return to the default soft key display, press ENTER again.