
Chapter 3: Operation |
Waypoint Data Display
In plotter mode, waypoint data can be viewed in two ways; either using the
➤To display the waypoint details from the Waypoint List:
1.Select the waypoint from the Waypoint List as described in Selecting a Waypoint on page
The details for the selected waypoint are displayed. Temperature, depth, date and time are included (if available) for waypoints placed at the vessel’s position.
2.To remove the Waypoint List and return to the default soft key dis- play, press CLEAR twice.
➤To display the Waypoint Data Box:
1.Move the cursor over the waypoint.
•The Waypoint Data Box is displayed which indicates waypoint number/name, bearing and range (or lat/lon if selected in the sys- tem set up menu, see System Set Up Parameters on page
•Whilst the cursor is over the waypoint, the waypoint soft keys are displayed, see Figure
➤To remove the Waypoint Data Box and soft keys either:
1.Move the cursor away from the waypoint, or...
2.Press CLEAR.
Editing Waypoint Details
You can change the name, symbol and position of any waypoint (except the target waypoint).
➤To edit a waypoint:
1.Select the waypoint, using the cursor or the Waypoint List, as described in Selecting a Waypoint on page
2.Press the EDIT WAYPOINT soft key. The Edit Waypoint soft keys are displayed:
SYMBOL NAME POSITION ERASE WPT
Figure 3-24: Edit Waypoint Soft Keys
Note: The ERASE WPT soft key is only available via the Waypoint List.