Manuals / Raymarine / Marine Equipment / Marine GPS System

Raymarine 300 manual Erasing a Waypoint, Moving a Waypoint

Models: 300

1 136

Download 136 pages 59.73 Kb

Page 47

Chapter 3: Operation

3-19

Erasing a Waypoint

In plotter mode you cannot erase the target waypoint or waypoints that are used in routes. However, you can remove a waypoint from the current route - see Editing a Route on page 3-33.

If you try to erase a waypoint that is used in a saved route you are warned

WAYPOINT IS USED IN A ROUTE & CANNOT BE DELETED.

➤To delete a waypoint using the Waypoint List:

1.Select the waypoint from the Waypoint List as previously described. The Waypoint List soft keys are displayed.

2.Press the EDIT WAYPOINT soft key, followed by ERASE WPT. The way- point is removed from the screen and the Waypoint List is updated.

3.If the the deleted waypoint was the only waypoint in the list, the default soft keys are displayed, otherwise, press CLEAR three times to return to the default soft keys.

➤To delete a waypoint using the cursor:

1.Move the cursor over the waypoint until the letters WPT are displayed. The waypoint soft keys are displayed.

2.Press the ERASE WAYPOINT soft key. The waypoint is removed from the screen and the Waypoint List is updated.

Moving a Waypoint

You can move any waypoint except the target waypoint (the waypoint you are navigating towards). You can use the Waypoint soft keys and cursor to move the selected waypoint, or you can edit the waypoint position.

CAUTION:

Take care when editing waypoints as it is possible to move waypoints that are used in routes stored in the Route List.

➤To move a waypoint using the Waypoint Edit functions:

1.Select the waypoint using either the cursor or the Waypoint List as described in Selecting a Waypoint on page 3-16; the waypoint soft keys are displayed.

2.To edit the waypoint position, proceed as previously described in Editing Waypoint Details on page 3-17.

➤To move a waypoint using the cursor:

1.Move the cursor over the waypoint, until the letters WPT are dis- played.

The waypoint soft keys are displayed.

Image 47

Raymarine 300 manual Erasing a Waypoint, Moving a Waypoint

Contents

Owner’s Handbook Raynav 300 GPS PlotterPage Prelim Pages SAFETY NOTICESRaynav 300 GPS Plotter Owner’s Handbook WAAS Satellite Differential GPSFigure i The WAAS System Availability of the WAAS System in North AmericaExtended Offshore Coverage Figure ii WAAS Coverage Map Coverage Outside of North AmericaAccuracy and Continuation of Broadcast Coverage Technical Accuracy WarrantyPreface EMC ConformanceChapter Contents - Raynav 300 PlotterChapter SAFETY NOTICESOperation Using the Route List to Erase or Name a RouteChapter Chapter Setting Up the GPS PlotterInstallation ChapterAppendix C List of Abbreviations Chapter 6 Maintenance & Fault FindingAppendix A Technical Summary Appendix B SeaTalk and NMEA DataHow this Handbook is Organized Chapter 1 Overview1.1 Introduction Display Modes 1.2 FeaturesGeneral DisplayDisplay Functions 1.3 The Plotter DisplayPlotter Functions GPS Data Pages 1.4 Operating ControlsMoving the Cursor Trackpad and CursorContext-Sensitive Cursor Control Dedicated KeysNote If the key text is greyed out, it is not currently available ALARMS SET UPSoft Keys Pop-Up Menus348 m Database ListsWAYPOINT LIST POSITIONConventions Used 2.2 Power On/OffChapter 2 Getting Started 2.1 IntroductionSTEER STARBOARD SD-FIXGPS STATUS 1.0 D-FIXChanging the Lighting and Contrast Note Factory default settings are LIGHT OFF and CONTRAST 50%2.3 Controlling the Display Selecting the Display ModeChapter 2 Getting Started Figure 2-5 Display Modes5050000W 00106000WPanning the Display Using FIND SHIP2.4 Plotter Display Control Functions Moving Around the Plotter ScreenChanging the Display Scale Changing the Display CenterCustomizing the Display Options Switching the Cursor Data Box On/offSwitching Grid On/off Simulator ModeRaynav 300 GPS Plotter 2-103.1 Introduction 3.2 Changing the Display ModeChapter 3 Operation Data Display Pages 12.0 kts 320 M0.55 nm 050 M12.0kts 320M0.55nm 050M133400 0.06 nm01 h00 m RNG 0.55 nmSPEED 11kts BRG 320MRNG 0.55nm DEPTH 12.5 mDEPTH 12.5M AUTOLOCK 323M 0.05nmFigure 3-11 Environment Data #1 WIND TRUEWIND APP Environment DataCDI/BDI Data 0.05nm300T 23.2nm0.05nm 28.7nm 124T MANUALData Boxes 104018 17kts 124TPOSITION TIMEData Log Introduction 3.3 Working with Waypoints348 m Placing a WaypointWAYPOINT LIST POSITIONFigure 3-19 New Waypoint Screen NEW WAYPOINT124 m RNG 12.6 nmFigure 3-21 Select Chain/Slaves Screen WPT POSITION LORAN TDs3-15 Figure 3-20 Waypoint Position Screen Loran TDsFigure 3-23 Waypoint Soft Keys Selecting a WaypointNote The ERASE WPT soft key is only available via the Waypoint List Waypoint Data DisplayEditing Waypoint Details D49091 Figure 3-25 Waypoint Symbol SelectionMoving a Waypoint Erasing a WaypointFigure 3-26 ST80 Navigator Keypad Using the ST60 or ST80 Navigator KeypadEditing Entries in the Waypoint, Route, or Track Lists Selecting an Entry in the Waypoint ListTo edit an item in a list using the Navigator Keypad 3.4 Working with Routes NEW ROUTE Figure 3-27 Default Soft Keys TypicalCreating a New Route WAYPOINTSTo make a new route by placing waypoints using the cursor D4928-1 Figure 3-31 Make Route Soft KeysSAVE ROUTE Saving the Current RouteROUTE LIST Displaying Route InformationFull Route Details INFO FOR ROUTE - NEW ROUTE CLEAR Clearing the Current Route from the ScreenRoute Leg and Waypoint Information D4915-1 D4961-1Retrieve a Route from the Database Using the Route List to Erase or Name a RouteAdding/Removing Waypoints at the End of the Route Editing a RouteInserting a Waypoint into a Route i. Press REVERSE ROUTE Removing a Waypoint from within the RouteReversing the Route Note The soft keys differ if a follow or goto is already in progress 3.5 Following Routes and Going to WaypointsGoing To an Individual Target Point Follow a Route LOWING ROUTE. CANCEL ROUTE AND GOTO CURSOR?Note You cannot remove a waypoint from a route if it is the target Other Follow Route OptionsAdvancing to a Waypoint Restart Cross Track Error XTEStop Follow or Stop Goto Joining a RouteTarget Point Arrival Receiving Waypoints from Other Equipment 3.6 Transferring Waypoints and RoutesDisplayed SeaTalk Waypoints Transferring Database ListsSending Waypoints to Other Equipment 3.7 Using TracksFigure 3-41 Track Interval Setting Guide Setting Up a TrackClearing the Current Track Saving and Naming the Current Track SmartRouteManaging Tracks Naming, Erasing and Showing a Track 162 T 3.8 Man Overboard MOBMOB DR 0.33 nmExternal Alarms 3.9 Alarms & TimersALARMS SET UP Setting Alarms and TimersFigure 3-47 Alarms Set Up Menu 3.10 Cursor Echo Raynav 300 GPS Plotter 3-504.1 Introduction Chapter 4 Setting Up the GPS PlotterTrack, detailed in Using Tracks on page Figure 4-1 Set Up Soft Keys 4.2 Changing the Set Up ParametersDefault 4.3 System Set Up ParametersTable 4-1 System Set Up Parameters Chapter 4 Setting Up the GPS PlotterCursor Reference Bearing ModeTable 4-1 System Set Up Parameters Continued Help Note The alarms continue to soundCursor Readout Day/NightUnits Menu Timeout PeriodAuto Mode Autopilot Pop UpNote The remote display must have SeaTalk Cursor Out enabled NMEA OUT Set UpDate and Time Settings Manual ModeLanguage GPS SourceGPS SOG/COG Filter NMEA InputTable 4-2 Plotter Set Up Parameters 4.4 Plotter Set Up ParametersChart Orientation Vectors Waypoint SymbolsDefault Waypoint Symbol Waypoint NumbersDatum Selection Position Offset1.0 D-FIX 4.5 GPS Set UpFix Mode GPS STATUSDIFFERENTIAL GPS SET UP D-GPS Set UpBeacon Frequency D-GPS ModeSignal Strength and Signal to Noise Ratio Beacon IDDifferential Age Restart GPSRaynav 300 GPS Plotter 4-165.1 Introduction Chapter 5 InstallationEMC Installation Guidelines Figure 5-1 Typical Suppression Ferrites Suppression FerritesConnections to Other Equipment Registering this Product System Parts and Accessories5.2 Unpacking and Inspecting the Components Items Missing?Surface Mounting 5.3 GPS Antenna InstallationD47251 Top viewUnderside view Figure 5-3 Pole Mounting Arrangement Pole Mounting5.4 Plotter Installation Raynav 300 GPS Plotter Figure 5-4 Raynav 300 GPS Plotter DimensionsTrunnion yoke Mounting Note The gasket must be fitted to ensure EMC compliance Panel MountingFigure 5-5 Panel Mounting 5.5 Connecting to Other EquipmentIntroduction Connectors5.6 Cable Running This unit is not intended for use on positive ground vessels Antenna ConnectorPWR/NMEA Connector Color Table 5-2 Power/NMEA ConnectionsFunction EMC Conformance 5.7 System Check and Initial Switch OnSeaTalk Connector System CheckChecking the Plotter Operation Initial Switch OnSYSTEM SET UP MENU Raynav 300 GPS Plotter 5-16Routine Checks Chapter 6 Maintenance & Fault Finding6.1 Maintenance EMC Servicing and Safety GuidelinesDisposal 6.2 Resetting the SystemNote The factory default settings are listed in Chapter 6.3 Problem SolvingRaynav 300 GPS Plotter Description Appendix A Technical SummaryAppendix A Technical Summary FeatureFrom a PC serial port via the NMEA inter FeatureBuilt in Lithium battery giving ~5 years DescriptionSource Appendix B SeaTalk and NMEA DataAppendix B SeaTalk and NMEA Data Data ReceivedNMEA Out The following data, if available, are transmitted on the SeaTalk portData Output SeaTalkMeaning Appendix C List of AbbreviationsAppendix C List of Abbreviations AbbreviationRaynav 300 GPS Plotter 3. LIMITED WARRANTY REMEDIES DISCLAIMER LIMITATION OF LIABILITY SiRF LICENSE AGREEMENT IMPORTANT - READ CAREFULLYPage GPS Antenna Mounting Template Installation TemplatesRaynav 300 Plotter 300/320 Template Raynav 300 GPS Plotter Mounting TemplateInstallation Templates Cut out shaded area onlyRaynav 300 GPS Plotter Index see also WAAS EMC see also WAAS Managing Page Page Page Obtaining Warranty Service Warranty CertificateLimited Warranty Installed WarrantyWarranty Limitations UK, Europe, Middle East, Far East Factory Service CentersSales & Order Services United States of America