Raymarine 300 manual Removing a Waypoint from within the Route, Reversing the Route

3-34 Raynav 300 GPS Plotter

waypoints can be added to the route in the same way as for a new route.

2.Move the cursor to the required location, and press PLACE WAYPOINT soft key.

3.Place as many waypoints as required and press the ACCEPT ROUTE soft key; the default soft keys are displayed.

Note: If you have placed waypoint(s) incorrectly, press the UNDO WAY- POINT soft key. Repeat to remove successive waypoints from the route, in- cluding existing waypoints.

Removing a Waypoint from within the Route

➤To remove a waypoint from within the current route:

1.Move the cursor over the required waypoint until the letters WPT appear; the waypoint soft keys are displayed.

2.Press the REMOVE WAYPOINT soft key. The waypoint is removed from the route and the route is re-numbered.

Note: You can remove the last waypoint from a route, as described in Adding/Removing Waypoints at the End of the Route above.

•If the route has not been saved, the waypoint is erased.

•If the route has been saved, the waypoint remains on the screen, but is no longer in the route.

Reversing the Route

This option enables a return route to be generated from an existing route which is then followed in reverse order, with waypoints renumbered accordingly.

➤To reverse the current route either:

•Press the ROUTE soft key followed by MORE.

i.Press REVERSE ROUTE.

ii.Press CLEAR to return to the default soft key display.

or...

•Move the cursor over a route leg until the letters RTE appear; the route soft keys are displayed.

i.Press the REVERSE ROUTE soft key; the current route is reversed on the screen and the waypoints are renumbered accordingly.

ii.Press CLEAR to return to the default soft key display.