Manuals / Raymarine / Marine Equipment / Marine GPS System

Raymarine 300 manual Time, Data Log, Position

Models: 300

1 136

Download 136 pages 59.73 Kb

Page 39

Data Log

Chapter 3: Operation

3-11

Data Log

The GPS Plotter can be set to log passage data every 30 minutes. Up to 48 log entries are held. When 48 entries have been saved, the first entries start being overwritten.

If the number of log entries exceeds the table size, use the trackpad up/down to scroll the list and view further log entries. Each line in the log shows:

•Time of log entry

•Position at time of log entry

•Course Made Good (CMG) since last log entry

•Distance Made Good (DMG) since last log entry

You can stop the log at any time and you can clear the log from memory.

➤To use Data Log Mode:

1.Press DISPLAY repeatedly until the Data Log table is displayed.

2.Press the START LOG soft key to start logging; the START LOG soft key changes to STOP LOG.

At 30 minute intervals, the current time, vessel’s position, distance made good (DMG) and course made good (CMG) are recorded as shown in Figure 3-16.

TIME	POSITION	CMG	DMG
09:00	50°50^000N	239°m	4.8nm
20/12	001°06^000W
09:30	50°51^000N	241°m	5.2nm
20/12	001°07^000W
10:00	50°52^000N	240°m	4.5nm
20/12	001°08^000W

ROUTE GOTO STOP LOG CLEAR LOG

D4924-1

Figure 3-16: Data Log Screen

3.Press the STOP LOG soft key to stop logging.

4.Press the CLEAR LOG soft key to clear all log entries.

Image 39

Raymarine 300 manual Time, Data Log, Position

Contents

Owner’s Handbook Raynav 300 GPS PlotterPage Prelim Pages SAFETY NOTICESRaynav 300 GPS Plotter Owner’s Handbook WAAS Satellite Differential GPSAvailability of the WAAS System in North America Extended Offshore CoverageFigure i The WAAS System Coverage Outside of North America Accuracy and Continuation of Broadcast CoverageFigure ii WAAS Coverage Map Technical Accuracy WarrantyPreface EMC ConformanceChapter Contents - Raynav 300 PlotterChapter SAFETY NOTICESUsing the Route List to Erase or Name a Route ChapterOperation Chapter Setting Up the GPS PlotterInstallation ChapterAppendix C List of Abbreviations Chapter 6 Maintenance & Fault FindingAppendix A Technical Summary Appendix B SeaTalk and NMEA DataChapter 1 Overview 1.1 IntroductionHow this Handbook is Organized Display Modes 1.2 FeaturesGeneral Display1.3 The Plotter Display Plotter FunctionsDisplay Functions GPS Data Pages 1.4 Operating ControlsMoving the Cursor Trackpad and CursorContext-Sensitive Cursor Control Dedicated KeysNote If the key text is greyed out, it is not currently available ALARMS SET UPSoft Keys Pop-Up Menus348 m Database ListsWAYPOINT LIST POSITIONConventions Used 2.2 Power On/OffChapter 2 Getting Started 2.1 IntroductionSTEER STARBOARD SD-FIXGPS STATUS 1.0 D-FIXChanging the Lighting and Contrast Note Factory default settings are LIGHT OFF and CONTRAST 50%Selecting the Display Mode 2.3 Controlling the DisplayChapter 2 Getting Started Figure 2-5 Display Modes5050000W 00106000WPanning the Display Using FIND SHIP2.4 Plotter Display Control Functions Moving Around the Plotter ScreenChanging the Display Scale Changing the Display CenterCustomizing the Display Options Switching the Cursor Data Box On/offSimulator Mode Switching Grid On/offRaynav 300 GPS Plotter 2-10Chapter 3 Operation 3.1 Introduction3.2 Changing the Display Mode Data Display Pages 12.0 kts 320 M0.55 nm 050 M12.0kts 320M0.55nm 050M133400 0.06 nm01 h00 m RNG 0.55 nmSPEED 11kts BRG 320MRNG 0.55nm DEPTH 12.5 mDEPTH 12.5M AUTOLOCK 323M 0.05nmFigure 3-11 Environment Data #1 WIND TRUEWIND APP Environment DataCDI/BDI Data 0.05nm300T 23.2nm0.05nm 28.7nm 124T MANUALData Boxes 104018 17kts 124TTIME Data LogPOSITION Introduction 3.3 Working with Waypoints348 m Placing a WaypointWAYPOINT LIST POSITIONFigure 3-19 New Waypoint Screen NEW WAYPOINT124 m RNG 12.6 nmFigure 3-21 Select Chain/Slaves Screen WPT POSITION LORAN TDs3-15 Figure 3-20 Waypoint Position Screen Loran TDsFigure 3-23 Waypoint Soft Keys Selecting a WaypointWaypoint Data Display Editing Waypoint DetailsNote The ERASE WPT soft key is only available via the Waypoint List D49091 Figure 3-25 Waypoint Symbol SelectionMoving a Waypoint Erasing a WaypointFigure 3-26 ST80 Navigator Keypad Using the ST60 or ST80 Navigator KeypadEditing Entries in the Waypoint, Route, or Track Lists Selecting an Entry in the Waypoint ListTo edit an item in a list using the Navigator Keypad 3.4 Working with Routes NEW ROUTE Figure 3-27 Default Soft Keys TypicalCreating a New Route WAYPOINTSTo make a new route by placing waypoints using the cursor D4928-1 Figure 3-31 Make Route Soft KeysSAVE ROUTE Saving the Current RouteDisplaying Route Information Full Route DetailsROUTE LIST INFO FOR ROUTE - NEW ROUTE Clearing the Current Route from the Screen Route Leg and Waypoint InformationCLEAR D4915-1 D4961-1Retrieve a Route from the Database Using the Route List to Erase or Name a RouteEditing a Route Inserting a Waypoint into a RouteAdding/Removing Waypoints at the End of the Route Removing a Waypoint from within the Route Reversing the Routei. Press REVERSE ROUTE 3.5 Following Routes and Going to Waypoints Going To an Individual Target PointNote The soft keys differ if a follow or goto is already in progress Follow a Route LOWING ROUTE. CANCEL ROUTE AND GOTO CURSOR?Note You cannot remove a waypoint from a route if it is the target Other Follow Route OptionsAdvancing to a Waypoint Restart Cross Track Error XTEStop Follow or Stop Goto Joining a RouteTarget Point Arrival Receiving Waypoints from Other Equipment 3.6 Transferring Waypoints and RoutesDisplayed SeaTalk Waypoints Transferring Database ListsSending Waypoints to Other Equipment 3.7 Using TracksFigure 3-41 Track Interval Setting Guide Setting Up a TrackClearing the Current Track SmartRoute Managing TracksSaving and Naming the Current Track Naming, Erasing and Showing a Track 162 T 3.8 Man Overboard MOBMOB DR 0.33 nmExternal Alarms 3.9 Alarms & TimersSetting Alarms and Timers Figure 3-47 Alarms Set Up MenuALARMS SET UP 3.10 Cursor Echo Raynav 300 GPS Plotter 3-50Chapter 4 Setting Up the GPS Plotter Track, detailed in Using Tracks on page4.1 Introduction Figure 4-1 Set Up Soft Keys 4.2 Changing the Set Up ParametersDefault 4.3 System Set Up ParametersTable 4-1 System Set Up Parameters Chapter 4 Setting Up the GPS PlotterTable 4-1 System Set Up Parameters Continued Bearing ModeCursor Reference Help Note The alarms continue to soundCursor Readout Day/NightVariation Source Menu Timeout PeriodAutopilot Pop Up UnitsCursor Echo NMEA OUT Set UpDate and Time Settings Note The remote display must have SeaTalk Cursor Out enabledLanguage GPS SourceGPS SOG/COG Filter NMEA Input4.4 Plotter Set Up Parameters Chart OrientationTable 4-2 Plotter Set Up Parameters Vectors Waypoint SymbolsDefault Waypoint Symbol Waypoint NumbersDatum Selection Position Offset1.0 D-FIX 4.5 GPS Set UpFix Mode GPS STATUSDIFFERENTIAL GPS SET UP D-GPS Set UpBeacon Frequency Signal Strength and Signal to Noise RatioD-GPS Mode Beacon IDDifferential Age Restart GPSRaynav 300 GPS Plotter 4-16Chapter 5 Installation EMC Installation Guidelines5.1 Introduction Suppression Ferrites Connections to Other EquipmentFigure 5-1 Typical Suppression Ferrites Registering this Product System Parts and Accessories5.2 Unpacking and Inspecting the Components Items Missing?Surface Mounting 5.3 GPS Antenna InstallationTop view Underside viewD47251 Figure 5-3 Pole Mounting Arrangement Pole Mounting5.4 Plotter Installation Figure 5-4 Raynav 300 GPS Plotter Dimensions Trunnion yoke MountingRaynav 300 GPS Plotter Note The gasket must be fitted to ensure EMC compliance Panel MountingFigure 5-5 Panel Mounting 5.5 Connecting to Other EquipmentConnectors 5.6 Cable RunningIntroduction Antenna Connector PWR/NMEA ConnectorThis unit is not intended for use on positive ground vessels Table 5-2 Power/NMEA Connections FunctionColor EMC Conformance 5.7 System Check and Initial Switch OnSeaTalk Connector System CheckInitial Switch On SYSTEM SET UP MENUChecking the Plotter Operation Raynav 300 GPS Plotter 5-16Routine Checks Chapter 6 Maintenance & Fault Finding6.1 Maintenance EMC Servicing and Safety GuidelinesDisposal 6.2 Resetting the SystemNote The factory default settings are listed in Chapter 6.3 Problem SolvingRaynav 300 GPS Plotter Description Appendix A Technical SummaryAppendix A Technical Summary FeatureFrom a PC serial port via the NMEA inter FeatureBuilt in Lithium battery giving ~5 years DescriptionSource Appendix B SeaTalk and NMEA DataAppendix B SeaTalk and NMEA Data Data ReceivedNMEA Out The following data, if available, are transmitted on the SeaTalk portData Output SeaTalkMeaning Appendix C List of AbbreviationsAppendix C List of Abbreviations AbbreviationRaynav 300 GPS Plotter 3. LIMITED WARRANTY REMEDIES DISCLAIMER LIMITATION OF LIABILITY SiRF LICENSE AGREEMENT IMPORTANT - READ CAREFULLYPage GPS Antenna Mounting Template Installation TemplatesRaynav 300 Plotter 300/320 Template Raynav 300 GPS Plotter Mounting TemplateInstallation Templates Cut out shaded area onlyRaynav 300 GPS Plotter Index see also WAAS EMC see also WAAS Managing Page Page Page Obtaining Warranty Service Warranty CertificateLimited Warranty Installed WarrantyWarranty Limitations UK, Europe, Middle East, Far East Factory Service CentersSales & Order Services United States of America