Manuals / Raymarine / Marine Equipment / Marine GPS System

Raymarine 300 manual Appendix A Technical Summary, Feature, Description

Models: 300

1 136

Download 136 pages 59.73 Kb

Page 115

Appendix A: Technical Summary

A-1

Appendix A: Technical Summary

Feature	Description

CE	Conforms to 89/336/EEC(EMC),
	EN60945:1997

Y2K	Compliant

Size	7.7in (195mm) x 4.33in (110mm) x 3.9in
	(99mm), excluding trunnion

Weight	1.65 lb. (0.75 kg)

Environmental	Waterproofing	To CFR46; suitable for external mount-
		ing

	Temp Range, Operating:	-10°C to +70°C

	Temp Range, Storage:	-40°C to +85°C

	Humidity	20% to 95% RH

Mounting	Trunnion (yoke) or panel

Power	Input voltage	9.0VDC to 32.0VDC with reverse polar-
		ity protection

	Consumption	<3W @12VDC (typical)
		<6W @12 VDC with full backlighting.

Controls	8 defined keys, 4 soft keys and trackpad

Display type	Film Super Twist Neumatic (FSTN) mono-	4 gray scales, 8 levels of backlighting,
	chrome LCD 240 x 160 pixels landscape	100 levels of contrast

Display size	4½in (114.3mm) diagonal

Interfaces	PWR/NMEA	NMEA 0183 V2.30 receive and transmit
		or RTCM input/NMEA 0183 V2.30
		transmit (detailed in Appendix B )
		Waypoint upload/download (WPL and
		RTE)

	SeaTalk	Detailed in Appendix B

	ANTENNA	GPS active antenna

Position data	GPS	WAAS / EGNOS / MSAS ready

GPS receiver	12-channel, Internal	1575.42 Mhz (C/A code), L1

Time to first fix	<8 seconds typical	<45 seconds from cold start
		(average)

Image 115

Raymarine 300 manual Appendix A Technical Summary, Feature, Description

Contents

Owner’s Handbook Raynav 300 GPS PlotterPage Prelim Pages SAFETY NOTICESRaynav 300 GPS Plotter Owner’s Handbook WAAS Satellite Differential GPSExtended Offshore Coverage Availability of the WAAS System in North AmericaFigure i The WAAS System Accuracy and Continuation of Broadcast Coverage Coverage Outside of North AmericaFigure ii WAAS Coverage Map Technical Accuracy WarrantyPreface EMC ConformanceChapter Contents - Raynav 300 PlotterChapter SAFETY NOTICESChapter Using the Route List to Erase or Name a RouteOperation Chapter Setting Up the GPS PlotterInstallation ChapterAppendix C List of Abbreviations Chapter 6 Maintenance & Fault FindingAppendix A Technical Summary Appendix B SeaTalk and NMEA Data1.1 Introduction Chapter 1 OverviewHow this Handbook is Organized Display Modes 1.2 FeaturesGeneral DisplayPlotter Functions 1.3 The Plotter DisplayDisplay Functions GPS Data Pages 1.4 Operating ControlsMoving the Cursor Trackpad and CursorContext-Sensitive Cursor Control Dedicated KeysNote If the key text is greyed out, it is not currently available ALARMS SET UPSoft Keys Pop-Up Menus348 m Database ListsWAYPOINT LIST POSITIONConventions Used 2.2 Power On/OffChapter 2 Getting Started 2.1 IntroductionSTEER STARBOARD SD-FIXGPS STATUS 1.0 D-FIXChanging the Lighting and Contrast Note Factory default settings are LIGHT OFF and CONTRAST 50%2.3 Controlling the Display Selecting the Display ModeChapter 2 Getting Started Figure 2-5 Display Modes5050000W 00106000WPanning the Display Using FIND SHIP2.4 Plotter Display Control Functions Moving Around the Plotter ScreenChanging the Display Scale Changing the Display CenterCustomizing the Display Options Switching the Cursor Data Box On/offSwitching Grid On/off Simulator ModeRaynav 300 GPS Plotter 2-10Chapter 3 Operation 3.2 Changing the Display Mode3.1 Introduction Data Display Pages 12.0 kts 320 M0.55 nm 050 M12.0kts 320M0.55nm 050M133400 0.06 nm01 h00 m RNG 0.55 nmSPEED 11kts BRG 320MRNG 0.55nm DEPTH 12.5 mDEPTH 12.5M AUTOLOCK 323M 0.05nmFigure 3-11 Environment Data #1 WIND TRUEWIND APP Environment DataCDI/BDI Data 0.05nm300T 23.2nm0.05nm 28.7nm 124T MANUALData Boxes 104018 17kts 124TData Log TIMEPOSITION Introduction 3.3 Working with Waypoints348 m Placing a WaypointWAYPOINT LIST POSITIONFigure 3-19 New Waypoint Screen NEW WAYPOINT124 m RNG 12.6 nmFigure 3-21 Select Chain/Slaves Screen WPT POSITION LORAN TDs3-15 Figure 3-20 Waypoint Position Screen Loran TDsFigure 3-23 Waypoint Soft Keys Selecting a WaypointEditing Waypoint Details Waypoint Data DisplayNote The ERASE WPT soft key is only available via the Waypoint List D49091 Figure 3-25 Waypoint Symbol SelectionMoving a Waypoint Erasing a WaypointFigure 3-26 ST80 Navigator Keypad Using the ST60 or ST80 Navigator KeypadEditing Entries in the Waypoint, Route, or Track Lists Selecting an Entry in the Waypoint ListTo edit an item in a list using the Navigator Keypad 3.4 Working with Routes NEW ROUTE Figure 3-27 Default Soft Keys TypicalCreating a New Route WAYPOINTSTo make a new route by placing waypoints using the cursor D4928-1 Figure 3-31 Make Route Soft KeysSAVE ROUTE Saving the Current RouteFull Route Details Displaying Route InformationROUTE LIST INFO FOR ROUTE - NEW ROUTE Route Leg and Waypoint Information Clearing the Current Route from the ScreenCLEAR D4915-1 D4961-1Retrieve a Route from the Database Using the Route List to Erase or Name a RouteInserting a Waypoint into a Route Editing a RouteAdding/Removing Waypoints at the End of the Route Reversing the Route Removing a Waypoint from within the Routei. Press REVERSE ROUTE Going To an Individual Target Point 3.5 Following Routes and Going to WaypointsNote The soft keys differ if a follow or goto is already in progress Follow a Route LOWING ROUTE. CANCEL ROUTE AND GOTO CURSOR?Note You cannot remove a waypoint from a route if it is the target Other Follow Route OptionsAdvancing to a Waypoint Restart Cross Track Error XTEStop Follow or Stop Goto Joining a RouteTarget Point Arrival Receiving Waypoints from Other Equipment 3.6 Transferring Waypoints and RoutesDisplayed SeaTalk Waypoints Transferring Database ListsSending Waypoints to Other Equipment 3.7 Using TracksFigure 3-41 Track Interval Setting Guide Setting Up a TrackClearing the Current Track Managing Tracks SmartRouteSaving and Naming the Current Track Naming, Erasing and Showing a Track 162 T 3.8 Man Overboard MOBMOB DR 0.33 nmExternal Alarms 3.9 Alarms & TimersFigure 3-47 Alarms Set Up Menu Setting Alarms and TimersALARMS SET UP 3.10 Cursor Echo Raynav 300 GPS Plotter 3-50Track, detailed in Using Tracks on page Chapter 4 Setting Up the GPS Plotter4.1 Introduction Figure 4-1 Set Up Soft Keys 4.2 Changing the Set Up ParametersDefault 4.3 System Set Up ParametersTable 4-1 System Set Up Parameters Chapter 4 Setting Up the GPS PlotterTable 4-1 System Set Up Parameters Continued Bearing ModeCursor Reference Help Note The alarms continue to soundCursor Readout Day/NightUnits Menu Timeout PeriodAuto Mode Autopilot Pop UpNote The remote display must have SeaTalk Cursor Out enabled NMEA OUT Set UpDate and Time Settings Manual ModeLanguage GPS SourceGPS SOG/COG Filter NMEA InputChart Orientation 4.4 Plotter Set Up ParametersTable 4-2 Plotter Set Up Parameters Vectors Waypoint SymbolsDefault Waypoint Symbol Waypoint NumbersDatum Selection Position Offset1.0 D-FIX 4.5 GPS Set UpFix Mode GPS STATUSDIFFERENTIAL GPS SET UP D-GPS Set UpBeacon Frequency D-GPS ModeSignal Strength and Signal to Noise Ratio Beacon IDDifferential Age Restart GPSRaynav 300 GPS Plotter 4-16EMC Installation Guidelines Chapter 5 Installation5.1 Introduction Connections to Other Equipment Suppression FerritesFigure 5-1 Typical Suppression Ferrites Registering this Product System Parts and Accessories5.2 Unpacking and Inspecting the Components Items Missing?Surface Mounting 5.3 GPS Antenna InstallationUnderside view Top viewD47251 Figure 5-3 Pole Mounting Arrangement Pole Mounting5.4 Plotter Installation Trunnion yoke Mounting Figure 5-4 Raynav 300 GPS Plotter DimensionsRaynav 300 GPS Plotter Note The gasket must be fitted to ensure EMC compliance Panel MountingFigure 5-5 Panel Mounting 5.5 Connecting to Other Equipment5.6 Cable Running ConnectorsIntroduction PWR/NMEA Connector Antenna ConnectorThis unit is not intended for use on positive ground vessels Function Table 5-2 Power/NMEA ConnectionsColor EMC Conformance 5.7 System Check and Initial Switch OnSeaTalk Connector System CheckSYSTEM SET UP MENU Initial Switch OnChecking the Plotter Operation Raynav 300 GPS Plotter 5-16Routine Checks Chapter 6 Maintenance & Fault Finding6.1 Maintenance EMC Servicing and Safety GuidelinesDisposal 6.2 Resetting the SystemNote The factory default settings are listed in Chapter 6.3 Problem SolvingRaynav 300 GPS Plotter Description Appendix A Technical SummaryAppendix A Technical Summary FeatureFrom a PC serial port via the NMEA inter FeatureBuilt in Lithium battery giving ~5 years DescriptionSource Appendix B SeaTalk and NMEA DataAppendix B SeaTalk and NMEA Data Data ReceivedNMEA Out The following data, if available, are transmitted on the SeaTalk portData Output SeaTalkMeaning Appendix C List of AbbreviationsAppendix C List of Abbreviations AbbreviationRaynav 300 GPS Plotter 3. LIMITED WARRANTY REMEDIES DISCLAIMER LIMITATION OF LIABILITY SiRF LICENSE AGREEMENT IMPORTANT - READ CAREFULLYPage GPS Antenna Mounting Template Installation TemplatesRaynav 300 Plotter 300/320 Template Raynav 300 GPS Plotter Mounting TemplateInstallation Templates Cut out shaded area onlyRaynav 300 GPS Plotter Index see also WAAS EMC see also WAAS Managing Page Page Page Obtaining Warranty Service Warranty CertificateLimited Warranty Installed WarrantyWarranty Limitations UK, Europe, Middle East, Far East Factory Service CentersSales & Order Services United States of America