Manuals / Raymarine / Marine Equipment / Marine GPS System

Raymarine manual Trunnion yoke Mounting, 4 Raynav 300 GPS Plotter Dimensions

Models: 300

1 136

Page 102

5-8

Raynav 300 GPS Plotter

Figure 5-4: Raynav 300 GPS Plotter Dimensions

Trunnion (yoke) Mounting

The display unit can be conveniently mounted on a dash area, chart table, bulkhead or deckhead.

Note: The gasket should be fitted to the rear of the unit to ensure EMC compliance.

➤To trunnion mount the display unit, proceed as follows:

1.Loosen the trunnion knobs and remove the trunnion from the display unit.

2.Mark the locations of the trunnion screw holes on the mounting sur- face.

3.Use the screws supplied to fix the trunnion at the marked locations.

Page 102

Image 102

Raymarine manual Trunnion yoke Mounting, 4 Raynav 300 GPS Plotter Dimensions

Contents

Raynav 300 GPS Plotter Owner’s HandbookPage WAAS Satellite Differential GPS SAFETY NOTICESRaynav 300 GPS Plotter Owner’s Handbook Prelim PagesAvailability of the WAAS System in North America Extended Offshore CoverageFigure i The WAAS System Coverage Outside of North America Accuracy and Continuation of Broadcast CoverageFigure ii WAAS Coverage Map EMC Conformance WarrantyPreface Technical AccuracySAFETY NOTICES Contents - Raynav 300 PlotterChapter ChapterUsing the Route List to Erase or Name a Route ChapterOperation Chapter Setting Up the GPS PlotterInstallation ChapterAppendix B SeaTalk and NMEA Data Chapter 6 Maintenance & Fault FindingAppendix A Technical Summary Appendix C List of AbbreviationsChapter 1 Overview 1.1 IntroductionHow this Handbook is Organized Display 1.2 FeaturesGeneral Display Modes1.3 The Plotter Display Plotter FunctionsDisplay Functions 1.4 Operating Controls GPS Data PagesTrackpad and Cursor Moving the CursorDedicated Keys Context-Sensitive Cursor ControlPop-Up Menus ALARMS SET UPSoft Keys Note If the key text is greyed out, it is not currently availablePOSITION Database ListsWAYPOINT LIST 348 m2.1 Introduction 2.2 Power On/OffChapter 2 Getting Started Conventions Used1.0 D-FIX SD-FIXGPS STATUS STEER STARBOARDNote Factory default settings are LIGHT OFF and CONTRAST 50% Changing the Lighting and Contrast2.3 Controlling the Display Selecting the Display Mode00106000W Figure 2-5 Display Modes5050000W Chapter 2 Getting StartedMoving Around the Plotter Screen Using FIND SHIP2.4 Plotter Display Control Functions Panning the DisplayChanging the Display Center Changing the Display ScaleSwitching the Cursor Data Box On/off Customizing the Display OptionsSwitching Grid On/off Simulator Mode2-10 Raynav 300 GPS PlotterChapter 3 Operation 3.1 Introduction3.2 Changing the Display Mode Data Display Pages 050 M 320 M0.55 nm 12.0 kts050M 320M0.55nm 12.0ktsRNG 0.55 nm 0.06 nm01 h00 m 133400DEPTH 12.5 m BRG 320MRNG 0.55nm SPEED 11kts0.05nm AUTOLOCK 323M DEPTH 12.5MEnvironment Data WIND TRUEWIND APP Figure 3-11 Environment Data #123.2nm 0.05nm300T CDI/BDI Data104018 17kts 124T 28.7nm 124T MANUALData Boxes 0.05nmTIME Data LogPOSITION 3.3 Working with Waypoints IntroductionPOSITION Placing a WaypointWAYPOINT LIST 348 mRNG 12.6 nm NEW WAYPOINT124 m Figure 3-19 New Waypoint ScreenFigure 3-20 Waypoint Position Screen Loran TDs WPT POSITION LORAN TDs3-15 Figure 3-21 Select Chain/Slaves ScreenSelecting a Waypoint Figure 3-23 Waypoint Soft KeysWaypoint Data Display Editing Waypoint DetailsNote The ERASE WPT soft key is only available via the Waypoint List Figure 3-25 Waypoint Symbol Selection D49091Erasing a Waypoint Moving a WaypointUsing the ST60 or ST80 Navigator Keypad Figure 3-26 ST80 Navigator KeypadSelecting an Entry in the Waypoint List Editing Entries in the Waypoint, Route, or Track ListsTo edit an item in a list using the Navigator Keypad 3.4 Working with Routes WAYPOINTS Figure 3-27 Default Soft Keys TypicalCreating a New Route NEW ROUTETo make a new route by placing waypoints using the cursor Figure 3-31 Make Route Soft Keys D4928-1Saving the Current Route SAVE ROUTEDisplaying Route Information Full Route DetailsROUTE LIST INFO FOR ROUTE - NEW ROUTE Clearing the Current Route from the Screen Route Leg and Waypoint InformationCLEAR D4961-1 D4915-1Using the Route List to Erase or Name a Route Retrieve a Route from the DatabaseEditing a Route Inserting a Waypoint into a RouteAdding/Removing Waypoints at the End of the Route Removing a Waypoint from within the Route Reversing the Routei. Press REVERSE ROUTE 3.5 Following Routes and Going to Waypoints Going To an Individual Target PointNote The soft keys differ if a follow or goto is already in progress LOWING ROUTE. CANCEL ROUTE AND GOTO CURSOR? Follow a RouteOther Follow Route Options Note You cannot remove a waypoint from a route if it is the targetJoining a Route Restart Cross Track Error XTEStop Follow or Stop Goto Advancing to a WaypointTarget Point Arrival Transferring Database Lists 3.6 Transferring Waypoints and RoutesDisplayed SeaTalk Waypoints Receiving Waypoints from Other Equipment3.7 Using Tracks Sending Waypoints to Other EquipmentSetting Up a Track Figure 3-41 Track Interval Setting GuideClearing the Current Track SmartRoute Managing TracksSaving and Naming the Current Track Naming, Erasing and Showing a Track 0.33 nm 3.8 Man Overboard MOBMOB DR 162 T3.9 Alarms & Timers External AlarmsSetting Alarms and Timers Figure 3-47 Alarms Set Up MenuALARMS SET UP 3.10 Cursor Echo 3-50 Raynav 300 GPS PlotterChapter 4 Setting Up the GPS Plotter Track, detailed in Using Tracks on page4.1 Introduction 4.2 Changing the Set Up Parameters Figure 4-1 Set Up Soft KeysChapter 4 Setting Up the GPS Plotter 4.3 System Set Up ParametersTable 4-1 System Set Up Parameters DefaultTable 4-1 System Set Up Parameters Continued Bearing ModeCursor Reference Day/Night Note The alarms continue to soundCursor Readout HelpUnits Menu Timeout PeriodAutopilot Pop Up Variation SourceNote The remote display must have SeaTalk Cursor Out enabled NMEA OUT Set UpDate and Time Settings Cursor EchoNMEA Input GPS SourceGPS SOG/COG Filter Language4.4 Plotter Set Up Parameters Chart OrientationTable 4-2 Plotter Set Up Parameters Waypoint Numbers Waypoint SymbolsDefault Waypoint Symbol VectorsPosition Offset Datum SelectionGPS STATUS 4.5 GPS Set UpFix Mode 1.0 D-FIXD-GPS Set Up DIFFERENTIAL GPS SET UPBeacon ID Signal Strength and Signal to Noise RatioD-GPS Mode Beacon FrequencyRestart GPS Differential Age4-16 Raynav 300 GPS PlotterChapter 5 Installation EMC Installation Guidelines5.1 Introduction Suppression Ferrites Connections to Other EquipmentFigure 5-1 Typical Suppression Ferrites Items Missing? System Parts and Accessories5.2 Unpacking and Inspecting the Components Registering this Product5.3 GPS Antenna Installation Surface MountingTop view Underside viewD47251 Pole Mounting Figure 5-3 Pole Mounting Arrangement5.4 Plotter Installation Figure 5-4 Raynav 300 GPS Plotter Dimensions Trunnion yoke MountingRaynav 300 GPS Plotter Panel Mounting Note The gasket must be fitted to ensure EMC compliance5.5 Connecting to Other Equipment Figure 5-5 Panel MountingConnectors 5.6 Cable RunningIntroduction Antenna Connector PWR/NMEA ConnectorThis unit is not intended for use on positive ground vessels Table 5-2 Power/NMEA Connections FunctionColor System Check 5.7 System Check and Initial Switch OnSeaTalk Connector EMC ConformanceInitial Switch On SYSTEM SET UP MENUChecking the Plotter Operation 5-16 Raynav 300 GPS PlotterEMC Servicing and Safety Guidelines Chapter 6 Maintenance & Fault Finding6.1 Maintenance Routine Checks6.2 Resetting the System Disposal6.3 Problem Solving Note The factory default settings are listed in ChapterRaynav 300 GPS Plotter Feature Appendix A Technical SummaryAppendix A Technical Summary DescriptionDescription FeatureBuilt in Lithium battery giving ~5 years From a PC serial port via the NMEA interData Received Appendix B SeaTalk and NMEA DataAppendix B SeaTalk and NMEA Data SourceSeaTalk The following data, if available, are transmitted on the SeaTalk portData Output NMEA OutAbbreviation Appendix C List of AbbreviationsAppendix C List of Abbreviations MeaningRaynav 300 GPS Plotter SiRF LICENSE AGREEMENT IMPORTANT - READ CAREFULLY 3. LIMITED WARRANTY REMEDIES DISCLAIMER LIMITATION OF LIABILITYPage Installation Templates GPS Antenna Mounting TemplateRaynav 300 Plotter Cut out shaded area only Raynav 300 GPS Plotter Mounting TemplateInstallation Templates 300/320 TemplateRaynav 300 GPS Plotter Index see also WAAS EMC see also WAAS Managing Page Page Page Installed Warranty Warranty CertificateLimited Warranty Obtaining Warranty ServiceWarranty Limitations United States of America Factory Service CentersSales & Order Services UK, Europe, Middle East, Far East