
Raynav 300 GPS Plotter |
Route Leg and Waypoint Information
➤To display information about a route leg, move the cursor over the leg until the letters RTE appear. The Route Leg data box is displayed, together with the Follow Route soft keys as shown in Figure
ROUTE 01
ROUTE NOT NAMED
LEG 02 - 03
270°T 13.4nm
| FOLLOW |
|
| EDIT |
|
| CLEAR |
|
| REVERSE |
| ROUTE |
|
| ROUTE |
|
| ROUTE |
|
| ROUTE |
Figure 3-35: Route Leg Data Box and Soft Keys
Note: If a route is being followed, the FOLLOW ROUTE soft key changes to
STOP FOLLOW.
To remove the data box, move the cursor away from the route or press
CLEAR.
➤To display information about a route waypoint, move the cursor over the waypoint until the letters WPT appear. The Waypoint Data Box is displayed with the Follow Route soft keys as shown in Figure
WPT 017
60°08^21N
030°17^99W
RTE 01 WPT 02
| FOLLOW |
|
| EDIT |
|
|
| REMOVE |
|
| MOVE |
|
|
|
|
|
| ||||||||
| FROM HERE |
|
| WAYPOINT |
|
|
| WAYPOINT |
|
| WAYPOINT |
|
Figure 3-36: Waypoint Data Box and Soft Keys
The Waypoint can be edited by means of the associated soft keys, see Editing Waypoint Details on page
To remove the data box, move the cursor away from the waypoint or press CLEAR.
Clearing the Current Route from the Screen
If the current route has not been saved, you have the option of saving it; if you are following the current route, you have the option to stop.
➤To clear the current route, either:
1.Place the cursor over a route leg until the text RTE is displayed. The Route soft keys are displayed as shown in Figure