Simulator Mode, Switching Grid On/off | Raymarine 300 specification

Chapter 2: Getting Started

2-9

Switching Grid On/off

The Plotter display can be set to show grid lines of latitude and longitude which can help determine position.

➤To turn the grid on or off:

1.Press the SCREEN default soft key.

2.Press the CHRT GRID soft key to toggle the setting ON and OFF.

3.To return to the default soft key display, press CLEAR.

Simulator Mode

When simulator mode is started, your initial simulated position is wherever the cursor was last positioned. To practice using the Plotter in a particular area, use the trackpad to pan to that area, then switch simulator ON.

A data box indicating SIMULATOR ON is displayed in the center of the screen (this may obscure the cursor; if necessary use the trackpad to move the cursor into view). You can use the context-sensitive cursor to move this box

Note: If you use FIND SHIP when in Simulator mode, the Status Bar at the top of the screen shows SIM FIX. If real position data is available (via GPS) and the simulator is active, simulated data takes precedence.

On power-up the simulator defaults to its previous setting at last pow- er-down. Care should be taken to determine desired mode on power-up.

Simulated data should never be used for navigational purposes. Any waypoints placed on the plotter in simulator mode are retained in the Waypoint List and are available for use in routes.

➤To view a simulated display:

1.Press MENU followed by the SYSTEM SET UP soft key. The System Set Up menu pop-up is displayed.

2.Use the trackpad up/down to move the selection bar over the option SIMULATOR. The simulator soft keys are displayed.

3.Press the ON soft key to start simulation.

4.Press ENTER twice to return to the default display.

Image 27

Raymarine 300 manual Simulator Mode, Switching Grid On/off

Contents

Raynav 300 GPS Plotter Page Waas Satellite Differential GPS Raynav 300 GPS Plotter Owner’s Handbook Extended Offshore Coverage Availability of the Waas System in North America Coverage Outside of North America Accuracy and Continuation of Broadcast CoveragePrelim Pages Technical Accuracy WarrantyPreface EMC Conformance Contents Raynav 300 Plotter Viii Prelim Pages Maintenance Routine Checks How this Handbook is Organized Introduction Display Modes FeaturesGeneral Display Plotter Display Plotter FunctionsDisplay Functions GPS Data Pages Operating Controls Moving the Cursor Trackpad and Cursor Text Label Feature Dedicated KeysContext-Sensitive Cursor Control Pop-Up Menus Soft Keys Waypoint List Database Lists Power On/Off Conventions UsedSimulator 5050000N WPT RNG 00106000W 0.55nm 42% 60% Changing the Lighting and Contrast Controlling the Display Selecting the Display Mode 12.0ktsDATA 320M Depth 12.5m 55nmSpeed 11kts 050M Panning the Display Using Find ShipPlotter Display Control Functions Moving Around the Plotter Screen Changing the Display Scale Changing the Display Center Customizing the Display Options Switching the Cursor Data Box On/off Switching Grid On/off Simulator Mode Raynav 300 GPS Plotter Operation Changing the Display Mode Data Display Pages GPS Data GPS/Waypoint Data 123400 Waypoint Data RNG 0.55 nm Boat Data Boat/Environment Data Auto Environment Data Kts CDI/BDI Data CDI DataBDI Data Data Boxes 300T Data Log CMG Introduction Working with Waypoints 17 Waypoint Soft Keys Placing a Waypoint NEW Waypoint WPT Position Loran TDs 23 Waypoint Soft Keys Selecting a Waypoint Editing Waypoint Details Waypoint Data Display 25 Waypoint Symbol Selection Moving a Waypoint Erasing a Waypoint 26 ST80 Navigator Keypad Using the ST60 or ST80 Navigator Keypad Selecting an Entry in the Waypoint List Raynav 300 GPS Plotter Working with Routes NEW Route Creating a New Route 30 Route Soft Keys 31 Make Route Soft Keys Save Route Saving the Current Route Full Route Details Displaying Route Information Info for Route NEW Route Route Leg and Waypoint Information Clearing the Current Route from the Screen 37 Stop Follow Soft Keys Retrieve a Route from the Database Using the Route List to Erase or Name a Route Editing a Route Inserting a Waypoint into a RouteAdding/Removing Waypoints at the End of the Route Reversing the Route Removing a Waypoint from within the Route Going To an Individual Target Point Following Routes and Going to Waypoints Follow a Route Lowing ROUTE. Cancel Route and Goto CURSOR? Press the Follow Route soft key Other Follow Route Options Advancing to a Waypoint Restart Cross Track Error XTEStop Follow or Stop Goto Joining a Route Target Point Arrival Receiving Waypoints from Other Equipment Transferring Waypoints and RoutesDisplayed SeaTalk Waypoints Transferring Database Lists Sending Waypoints to Other Equipment Using Tracks 41 Track Interval Setting Guide Setting Up a Track Clearing the Current Track 42 Set Up Soft Keys SmartRoute Managing TracksSaving and Naming the Current Track Save TRACK, Name Track or Erase Track soft key Naming, Erasing and Showing a Track 2nm Man Overboard MOB Alarms & Timers External AlarmsAlarmIndicates 47 Alarms Set Up Menu Setting Alarms and Timers Cursor Echo Raynav 300 GPS Plotter Setting Up the GPS Plotter To set the default parameters Changing the Set Up Parameters Factory New Menu Options Default System Set Up Parameters Cursor Reference Bearing Mode Key Beep Cursor ReadoutDay/Night Help Units Menu Timeout PeriodAuto Mode Autopilot Pop Up Cursor Echo Nmea OUT Set UpDate and Time Settings Manual Mode Language GPS SourceGPS SOG/COG Filter Nmea Input Plotter Set Up Parameters Chart OrientationFactory New Parameter Options Default Vectors Waypoint SymbolsDefault Waypoint Symbol Waypoint Numbers Datum Selection Position Offset Fix Mode GPS Set Up Differential GPS SET UP GPS Set Up Beacon Frequency GPS ModeSignal Strength and Signal to Noise Ratio Beacon ID Differential Age Restart GPS Raynav 300 GPS Plotter EMC Installation Guidelines Installation Connections to Other Equipment Suppression Ferrites Supplied with Unpacking and Inspecting the ComponentsItems Missing? Registering this Product Surface Mounting GPS Antenna Installation Surface Mounting Arrangement Refer to Figure Pole Mounting Plotter Installation Trunnion yoke Mounting Raynav 300 GPS Plotter Dimensions Panel Mounting Panel Mounting Connecting to Other Equipment Cable Running Connectors PWR/NMEA Connector Antenna Connector Function Color Maximum Power Cable Extension Lengths System Check and Initial Switch On SeaTalk ConnectorSystem Check Checking the Plotter Operation Initial Switch On Raynav 300 GPS Plotter Maintenance EMC Servicing and Safety GuidelinesRoutine Checks Resetting the System Power-on SettingDisposal Problem Corrective Action Problem Solving Raynav 300 GPS Plotter Appendix a Technical Summary Feature Description Face Memory Capacity Data Received Source Appendix B SeaTalk and Nmea Data RMB, APB, BWC, BWR Data Output SeaTalk Nmea Out Abbreviation Meaning Appendix C List of Abbreviations Raynav 300 GPS Plotter Important Read Carefully Page GPS Antenna Mounting Template Raynav 300 Plotter 03 in 102.3 mm Cut out shaded area only Raynav 300 GPS Plotter Index Xii See also Waas Managing Xiv Waas Xvi Limited Warranty Warranty Certificate Warranty Limitations Factory Service Centers