Raymarine 300 manual Trackpad and Cursor, Moving the Cursor

Chapter 1: Overview 1-5

POWER key Soft keys Soft key labels

Cursor

Status Bar

DISPLAY key

MARK key

RANGE key

ALARMS key

Trackpad

MENU key

D4925_2

CLEAR key

ENTER key

Figure 1-1: Raynav 300 GPS Plotter Operating Controls

Trackpad and Cursor

The trackpad is used to:

•Move the cursor around the screen

•Select an item from a pop-up menu

•Adjust a variable soft key control

The cursor is used to:

•Select a position on the screen.

•Select and, if valid, move an item, e.g. a waypoint, on the screen.

•Select an area of the screen to zoom into.

•Pan the display.

Moving the Cursor

Press the corresponding edge of the trackpad to move the cursor horizontally, vertically or diagonally; the longer you press, the faster the cursor moves. The current cursor position is shown in the Status Bar at the top of the display.

Note: When certain menus and soft keys are displayed, the cursor is not active. If you find that you cannot move the cursor, it may be because the unit is in one of these modes. Press CLEAR (repeatedly) until the default soft keys are displayed; the cursor should then respond.