SATO GL4XXE manual Dgl Emulation Mode Table, Zgl Emulation Mode Table, Menu, Description

		Unit 4: Printer Configuration
		ZGL EMULATION MODE (TABLE 4-11)
MENU		DESCRIPTION
	This menu allows the operator to map the device B: to an External Memory Cartridge or PC
	Board Flash.
Storage Select
	•	B: = EMC - factory default. External Memory Cartridge.
B: = EMC*
	•	B: = PCB Flash - PC Board Flash.
	Network Identification. Allows the operator to assign an identification number to the network.
	•	0 - factory default. Without identification.
Network ID
0*	• 1 to 999 - a range of numbers to choose for idenfication.
	Allows the language to be selected for the character group to represent.
	There are multiple languages from which to choose. The factory default is Standard Set.
Character Group
Standard Set*
	Allows further language clarification by choosing language options from a group within the
	Standard Set of characters.
Standard Sets
	There are multiple languages from which to choose. The factory default is USA1.
USA 1*
		DGL EMULATION MODE (TABLE 4-12)
MENU		DESCRIPTION
	Permits entry into the EMULATION Mode.
EMULATION
	Allows the specific emulation to be selected or if the Select option is chosen, the menu to follow
	will contain a list of emulation options available.
EMULATION
Select
	Allows the selection of the specific emulation to be selected from a list.
	The allowable emulation options are: PGL for Printronics, ZGL for Zebra, TGL for TEC, IGL for
Select
DGL*	Intermec, SGPL for SATO, and DGL for Datamax.

GL408-412e Operator’s Manual 4-72