SATO GL4XXE This option determines how scalable characters are sized, IGP-X00 printers, Form

		Unit 4: Printer Configuration
		PGL EMULATION MODE (TABLE 4-10)
MENU		DESCRIPTION
	This option determines how scalable characters are sized.
	•	Normal - factory default. Normal scaling.
Scalable Size
Normal*	•	Block - the scalable characters are made to be the same size as block characters in the old
		IGP-X00 printers.
	Determines the handling of form.
	•	Disable - factory default. No effect.
Forms Handling
	•	Auto Eject - automatically ejects a page at the end of the job.
Disable*
	•	Auto TOF - automatically does a form feed (FF) at the end of each form to the next top-of-
		form.
	Determines whether PGL passes the text data in Normal mode or if PGL will print the text itself.
	•	LP + Menu - factory default. PGL will pass the text data to LP+ only in the default setting
PGL Normal
LP+ Menu*		state (6LPI, defualt character set, and font attribute).
	•	PGL Menu - PGL will always print the text data itself.
	Allows printing barcode descenders when human-readable data is not presented in the UPC/
	EAN barcodes.
	•	Always - factory default. UPC/EAN barcodes are printed with descenders, even where there
UPC Descenders
		is not human-readable data.
Always*
	•	Never - UPC/EAN barcodes are printed without descenders if the PDF command is present.

•Only With PDF - UPC/EAN barcodes are printed with descenders only when the PDF command is presented.

	Interleaved 2 of 5. Allows compatibility with special IGP-X00 customizations. Usually, these
	barcodes have an odd quantity of digits, a leading zero is inserted in front of the data. However,
	this special IGP-X00 customization provides the option of adding a space character at the end of
	the barcode instead.
	• Leading Zero - factory default. A leading zero is inserted in front of the data.
I-2/5 Selection
Loading Zero*	• Trailing Space - a space is inserted at the end of the data instead of a leading zero.

•X2 DPD - the barcode with a magnification of x2 wil use the specially configured ratios 3:3:6:5 rather than 3:6:9:12 for compatibility issues.

•Modulo 7 CD - the barcode uses a modulo 7 check digit instead of the default module 10 check digit.

	Allows the prior metho of decoding C39 alternative character set compatible with the new.
	• Enable - factory default. Matches the prior method.
C39 Compatbl.
Disable*	• Disable - uses the current method of decoding.
	Allows the user-defined barcode ratio to be ignored and to replace it with the default ratio (X1).
	• Enable - factory default. Allows the user-defined barcode ratio.
User-Def Ratio
Enable*	• Disable - replaces the user-defined ratio.
	Adjust the leading and trailing character distance ofPDF for UPC/EAN barcodes.
	The allowable range is 0.01 to 0.10 inches in 0.01 increments. the factory default is 0.10 inches.
Lead PDF Dist
0.10 inches*

GL408-412e Operator’s Manual 4-67