SATO GL4XXE Pgl Emulation Mode Table, Wireless Local Area Network Wlan Interface Mode Table, Menu

Unit 4: Printer Configuration

WIRELESS LOCAL AREA NETWORK (WLAN) INTERFACE MODE (TABLE 4-9)

MENU		DESCRIPTION
	International Mode. Allows the determination of whether the wireless option adapts to
	international frequency requirements in Europe.
Internat. Mode
	•	Disable - factory default. Conforms to European standards.
Disable*
	•	Enable - does not conform to European standards.
	Authentification Method. Allows the authentification method used for the wireless network
	interface to be selected.
Auth Method
	•	Open - factory default. Provides open authentification.
Open*
	•	Shared - provides shared key authentification.
	Allows all four WEP keys to be simultaneously reset.
WLAN SETTING
Reset WEP Keys
	Allows which WEP Key will be formatted in the following menus.
WLAN SETTING
WEP Key X
	Is a transitional menu screen that wil lead to menu screens that will allow the WEP Key to be
	formatted.
WEP Key X
Key Format
	Allows WEP Key input format to be selected.
	•	Hexadecimal - factory default. Valid characters are 0 to 9 and A to F (upper case only) with a
Key Format
Hexadecimal *		maximum of 32 characters.
	•	ASCII - allows for alphanumeric characters to be used with a maximum of 16 characters.
	Allows the operator to select the width of the key desired.
	•	128 Bits - factory default. 32 Hex values or 16 ASCII characters.
Key Width
128 Bits *	•	40 Bits - 10 Hex values or 5 ASCII characters.
	Enables the encryption (scramble) of information for security purposes. Up to four encription keys
	may be set in either ASCII or hexdecimal format, and in either 40 or 128 bits. The mode bits
Byte XX
	chosen, the greater the difficulty of decoding the information.
00 *
	Note: None of the WEP Key Configuration menus display on the configuration printout.

	PGL EMULATION MODE (TABLE 4-10)
MENU	DESCRIPTION
	Permits entry into the EMULATION Mode.
EMULATION

GL408-412e Operator’s Manual 4-62