SATO GL4XXE manual Advanced Mode Table, Menu, Description, menu options

		Unit 4: Printer Configuration
		ADVANCED MODE (TABLE 4-3)
MENU		DESCRIPTION
	Is the premiere menu screen of the Advanced Mode. Allows scrolling and selection of its primary
	menu options.
ADVANCED MODE
Media Handling
Adv Continuous
Print Mode
Gap/Mark Sensor
Run Auto Cal
Run Profile
Power Saver Time
Pwr Save Control
Display Language
Alarm
Auto Online
Cancel Key
Ret. Status Port
Del Char frm F1s
Ld Char from F1s
Save Char to F1s
Del Char frm RAM
Ld Char at PwrUp
Del Set frm F1s
Ld Set from F1s
Save Set to F1s
Del Set from RAM
Ld Set at PwrUp
Main FFS
Optimize&Reboot
Print File List
Auto Locking
Set Lock Key
Max Font Buffer
Max Cache Memory
Max Cached Char
Standard Chars.
Bold Chars.
Extra Bold Char.
OCR-A Chars.
OCR-B Chars.
Tall Characters
Batch Counter
Disp. Intensity
Sensor Setup
Admin User
	Permits selection of the media handling method desired.
	•	Tear-Off- factory default. Prints labels until the print buffer is empty, then positions the last
		label over the tear bar for removal.
	•	Continuous - prints continuously and feeds the printed labels along with its backing paper.
	• Peel-Off- prints die-cut labels and automatically peels away the backing paper as each label
		advances from the printer. The printer waits until the printed label is taken for application
Media Handling		before printing the next label. This method is only supported whenthe Value Peel or the Peel-
Continuous*		Off Rewinder option is installed. A Remove Label message will display on the LCD prompting
		label removal for each label printed.
	•	Cut - cuts printed labels or tags at the user specified intervals. Cutting may occur after each
		printed label/tag or following a specified quantity. Only available with cutter asembly installed.
	•	Rewind - rewinds printed labels onto a spindle assembly. This option is used for efficient
		storage of the printed labels to be applied at a later date. Only available with rewinder
		assembly installed.

GL408-412e Operator’s Manual 4-30