SATO GL4XXE manual Advanced Mode Table, Menu, Description

		Unit 4: Printer Configuration
		ADVANCED MODE (TABLE 4-3)
MENU		DESCRIPTION
	This feature provides a graphical printout showing the relationship of the Paper-Out Threshold
	and the Gap/Mark Threshold. The profile printed is to assist in setting the thresholds for difficult
ADVANCED MODE	media (preprinted labels and labels with poor gap/media dynamic range).
Run Profile	When selected, the printer will advance media and print the media profile along the length of
	each label. The factory default is Print Profile.
	Displays while the printer is printing the media profile. Will continue to print until the ENTER key is
	pressed.
Media Profile
Enter to Stop
	Permits entry into the Power Saver TIme sub-menus.
ADVANCED MODE
Power Saver Time
	The user specified time interval for this parameter sets the amount of idle time before the printer
	goes into Power Saver Mode. Pressing any key or sending a print job removes the power saver
Power Saver Time
	message from the LCD.
15 minutes*
	The options are 1, 5, 10, 15, 30, 45, 60, and 240 minutes. The factory default is 15 minutes.
	Permit the Power Saver mode to be enabled or disabled as preferred.
	•	Enable - factory default. Permits the setting from the Power Saver Time menu to become
Pwr Save Control
Enable*		effective.
	•	Disable - the power saver feature will not function.
	This menu permits the language to be chosen that will appear on the operator panel LCD. The
	language options are: English, German, French, Itilian, Spanish, or Portugese.
Display Language
	The factory default is English.
English*
	The printer has an integrated audible alarm that may be enabled to alert the user of detected
	faults. The manner of audible may also be determined in this menu.
Alarm	•	On - factory default. The audible alarm sounds 3 beeps when a fault occurs.
On*	•	Cont. Beep - the audible alarm emits a continuous beep upon the detection of a fault.
	•	Off - the audible alarm feature is disabled. Sound is not emitted upon a fault detection.
	This menu screen will only appear if the real-time clock chip has been installed. If installed, the
	menu will allow the time and date to be set. The time and date is expressed in hh:mm
Set Calendar
	YYYYMMMDD.
MM/DD/YY
	hh = hour, mm = minute, MMM = month, DD = day, YYYY = year
hh:mm
	Allows the determination of whether the printer will automatically power up in the online state.
	•	Enable - factory default. The printer powers up in the online state.
Auto Online
Enable*	•	Disable - the printer powers up in the state that conditions dictate.
	Permits the determination of whether a cancel key may be used in the offline mode to clear all
	data in the print buffer. The deleted data will not be printed. If enabled, the cancel key located on
	the host computer keyboard shall be the underscore (_) key.
Cancel Key
Enable*	•	Enable - factory default. The cancel key is functional.
	•	Disable - the cancel key is not functional.

GL408-412e Operator’s Manual 4-32