SATO GL4XXE manual Dgl Emulation Mode Table, Menu, Description

		Unit 4: Printer Configuration
		DGL EMULATION MODE (TABLE 4-12)
MENU		DESCRIPTION
	Selects how the printer will interpret measurements.
	•	Imperial - factory default. American Standard values.
Units of Measure
	•	Metric - uses Metric values.
Imperial*
	Note: <STX>n and <STX>m commands override this setting and will stay in effect until the printer
	is taken offline, then returned online.
	Shifts the vertical start of the print position. This a the user setting for row adjustment.
	The allowable range is 0 to 99.99 inches or 999.9 millimeters. The factory default is 0.
Row Offset
00.00 Inch*	Note: The Label Formatting command (R) only temporarily overrides this setting; it reverts back
	to this setting after the current label format is finished.
	Shifts the horizontal, left-justified start posiotn to the right without shifting the Label Width
	termination point to the right. This a the user setting for row adjustment.
Column Offset	The allowable range is 0 to 99.99 inches or 999.9 millimeters. The factory default is 0.
00.00 Inch*
	Note: The Label Formatting command (C) only temporarily overrides this setting; it reverts back
	to this setting after the current label format is finished.
	Format Attribute. Affects the manner in which overlapping text and graphics are treated as the
	label is printed.
	•	XOR - factory default. Intersecting text strings, images, and barcodes print on top of one
		another.
Format Attrib.
XOR*	•	Transparent - intersecting text strings, images, and barcodes will not be printed. An odd
		quantity of overlapping objects will print.

•Opaque - intersecting text strings, images, and barcodes are obliterated by those last formatted. Each character cell is treated as opaque.

	Defines how the emulation handles errors detected in the data stream. For all selections, data
	processing will not be aborted when errors are detected and labels will be printed as best
	possible. Commands containing errors will be ignored.
Error Handling	•	Off - factory default. Without signals to the user when errors are detected.
Off*
	•	Report - the printer will beep when one or more errors are detected and the first command
		that contains an error is displayed on the printer’s LCD in mnemonic form.
	•	Beep - the printer will beep once if one or more errors are detected.
	This option fine adjusts the resolution used to scale the page elements/coordinates. In cases
	where the printed label length is incorrect, the vertical resolution value DGL uses for calculations
	can be fine adjusted by this menu.
Vert. DPI Adjust
	Negative values result in a lower DPI value and thus a longer label. Positive values result in a
0*
	higher DPI value, and thus a shorter label.
	The allowable range is -100to +100, with a factory default of 0.
	Determines compatibility with legacy Datamax emulations.
	•	Standard - factory default. Standard emulation.
Compatibility
Standard*	•	S-462- specific printer model.

Allows the user to disable the Length Command.

	•	Process - factory default. Acknowledges length commands.
Length Cmd (STXc)
Process*	•	Ignore - does not acknowledge length commands.

GL408-412e Operator’s Manual 4-74