SATO GL4XXE manual Dgl Emulation Mode, 12, DGL Emulation Mode, 4-15

Unit 4: Printer Configuration

DGL EMULATION MODE

This chapter provides the programming sequences required to correlate the printer’s interpreter language with that of Datamax interpretor language. Use the keys of the printer’s operator panel to select and enter the required options.

Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.

ATTENTION: Perform the following programming sequence only if this is the emulation type required. Instead, refer to the appropriate emulation chart.

POWER

ONLINE

LINE

OFFLINE

FUNCTION

EMULATION

Emulation

Mode

ENTER

EMULATION

Select

Select

DGL*

DGL Setup

Active

Character Set

Euro Character

Control Codes

FeedBack Chars

Default Module

Units of Measure

Row Offset

Column Offset

Format Attrib.

Error Handling

Vert. DPI Adjust

Compatibility

Length Cmd (STXc)

Heat Cmd (H)

Speed Cmd (P,S)

Cut Cmd (o,:,c)

Soft. Switch (V)

Sensor Cmd (e,r)

Format Attr. (A)

Active	Error Handling
Yes*	Off*
Character Set	Vert. DPI Adjust
PC-8 CP 437*	0*
Euro Character	Compatibility
128*	Standard*
Control Codes	Length Cmd (STXc)
Standard*	Process*
FeedBack Chars	Heat Cmd (H)
Disable*	Process*
Default Module	Speed Cmd (P,S)
RAM*	Process*
Units of Measure	Cut Cmd (o,:,c)
Imperial*	Process*
Row Offset	Soft. Switch (V)
00.00 Inch*	Process*
Column Offset	Sensor Cmd (e,r)
00.00 Inch*	Process*
Format Attrib.	Format Attr. (A)
XOR*	Process*

Figure 4-12, DGL Emulation Mode

GL408-412e Operator’s Manual 4-15