SATO GL4XXE manual Sensing, Media, Ribbon, Regulatory

	Unit 2: Technical Data
SENSING
Gap	Position & Sensitivity Adjustable
Reflective Eye-Mark	Position & Sensitivity Adjustable
Ribbon Near End	Fixed (enabled/disabled)
Media Out	Fixed (always enabled)
Ribbon Out	Fixed (always enabled)
Cover Open	Fixed (always enabled)
MEDIA
Width	Media Width: 0.87 to 5.04 Inches (22 - 128mm)
	Media Width with Backing Paper: 0.98 to 5.16 Inches (25 - 131mm)
Length (Continous)	Media Length: 0.24 to 15.63 Inches (6 - 397mm)
	Media Length with Backing Paper: 0.35 to 15.75 Inches (9 - 400mm)
Length (Tear-Off)	Media Length: 0.67 to 15.63 Inches (17 - 397mm)
	Media Length with Backing Paper: 0.79 to 15.75 Inches (20 - 400mm)
	Roll or Fan-Fold
Type	Eye-Mark or Gap
	Direct Thermal or Thermal Transfer
Thickness	0.002 to 0.010 Inches ( 0.06 - 0.268 mm)
Roll Diameter	Maximum: 10.43 Inches (265mm)
Core Diameter	1.5 to 4.0 Inches (38.1 - 101.6mm)
Wind Direction	Face In, Face Out (linerless only)
Fan-Fold Height	Maximum: 7.87 Inches (200mm)
RIBBON
Width	Maximum: 5.04 Inches (128mm)
Length	1476 Feet (450M)
Wound	Face In, Face Out
Core Diameter	1.00 Inch (25.6 mm)
Roll Diameter	Maximum: 3.35 Inches (85 mm)
REGULATORY
Radiation Noise	FCC Part 15, Subpart B, Class B
	EN55022 Class B
Static Electricity	IEC61000-4-2, Level 3
AC Line Noise	Above: 1000Vp-p
Packing Drop Standard	ISTA-2A
	Chromium: below 0.1%
	Lead: below 0.1%
Environmental (RoHS)	Mercury: below 0.1%
	Cadmium: below 0.01%
	Polybrominated Bipheny (PBB): below 0.1%
	Polybrominated Diphenyl Ether (PBDE): below 0.1%

GL408-412e Operator’s Manual 2-3