SATO GL4XXE manual 2, Configuration Mode

Unit 4: Printer Configuration

CONFIGURATION MODE

The Configuration Mode is a set of menus that allows the operator to configure the printer on how to deal with multiple print jobs. This activity is focused on loading, saving, naming those jobs, and then deleting them when no longer needed.

Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.

POWER
ONLINE	CONFIG MODE	CONFIG MODE	CONFIG MODE
	Save Config.	Load Config.	Print Config.
	Save Config.	Load Config.	Print Config.
LINE	1*	Factory*	Current*
OFFLINE	Saving	Loading Factory
	Configuration	Configuration
FUNCTION	CONFIG MODE	CONFIG MODE	CONFIG MODE
	Delete Config.	Power-Up Config.	Protect Config.
CONFIG MODE
	Delete Config.	Power-Up Config.	Protect Configs.
	1*	Factory*	Disable*
Config	Deleting
Mode	Configuration
ENTER
CONFIG MODE
Save Config.
Load Config.	Name Config 1	Name Config 2	Name Config 3
Print Config.
	1	2	3
Delete Config.
Power-Up Config.
Protect Config.	Name Config 1	Name Config 2	Name Config 3
Name Config 1
Name Config 2	1*	2*	3*
Name Config 3
Name Config 4
Name Config 5
Name Config 6
Name Config 7
Name Config 8	Name Config 4	Name Config 5	Name Config 6
Reset Cfg Names
Auto Save	4	5	6
	Name Config 4	Name Config 5	Name Config 6
ENTER	4*	5*	6*
CONFIG MODE	Name Config 7	Name Config 8	CONFIG MODE
Auto Save	7	8	Reset Cfg Names
Auto Save	Name Config 7	Name Config 8	Reset Cfg Names
Enable*	7*	8*	1*
			Auto Save
			Enable*

Figure 4-2, Configuration Mode

GL408-412e Operator’s Manual 4-4