SATO GL4XXE manual Menu Definition Tables, User Mode Table, Description

Unit 4: Printer Configuration

MENU DEFINITION TABLES

USER MODE (TABLE 4-1)

MENU DESCRIPTION

Permits entry into the USER Mode.

INTERFACES

	Is the menu selection screen for the USER Mode.
USER MODE
Print Speed
Print Darkness
Pitch Offset
Ver Print Offset
Hor Print Offset
Label Length
Label Width
Slash Zero
Character Pitch
Protocol C. Code
Euro Character
Ver BaseRefPoint
Hor BaseRefPoint
UPC Descenders
Vert. DPI Adjust
C128 Mode Switch
Error Handling
Mem Select (CC1)
Orientation
Slew Speed Ctrl
Print Direction
Tear-Off Time
Label Missing
Clip Page
Fault Reprint
Display Ribbon
Ribbon Near End
Units
Set Label Length
TOF Detect Fault
TOF Adjust Mode
TOF Adjust
	Specifies the speed in inches per second (ips) at which the media passes through the printer
	while printing.
Print Speed
	The speed may be adjusted in increments of 1 ips with a range from 1 to 10 ips.
4 ips*
	The factory default is 4 ips.
	Specifies the level of thermal energy provided from the print head to affect print darkness. The
	print darkness setting needed is dependent on the type of ribbon and media installed for use and
Print Darkness	also relative to print speed.
5*
	The adjustment range is from -15to +15. The factory default is -3.
	This setting vertically adjusts where the printer begins printing relative to top-of-form.
	The allowable range is -12.7to +5 millimeters.
Pitch Offset
00.0 mm*

GL408-412e Operator’s Manual 4-22