SATO GL4XXE manual Centronics Interface Mode Table

	Unit 4: Printer Configuration
	PARALLEL INTERFACE MODE (TABLE 4-5)
MENU	DESCRIPTION
	Top-Of-Form Action. When enabled, the printer will feed out the job in process when the prime
	signal is activated through the parallel interface. If disabled, the job in process may be aborted.
TOF Action
Reset*
	Allows determination of whether the printer will process data while offline.
	• Disable - factory default. The printer does not process parallel/network data while offline.
Offline Process
Disable*	• Enable - the printer continues to process (but not print) the current network/parallel job while
	the printer is offline until the printer’s buffer is full.
	CENTRONICS INTERFACE MODE (TABLE 4-6)
MENU	DESCRIPTION
	Permits entry into the INTERFACES Mode.
INTERFACES

	Is the menu selection screen for the INTERFACES Mode.
INTERFACES
Ignore CR/LF
Item No. Check
BCC Check
History Buffer
Comm. Protocol
Host Interface
Parallel Port
USB Port
Serial Port
Printer Mgmt
	Determines whether the print data code will be deleted. Hexadecimal graphic data will not be
	deleted.
Ignore CR/LF	•	No - factory default. Will not be deleted.
No*
	•	Yes - will delete all carriage returns (CR) and line feed (LF) commands in the data stream -
		including graphics and 2D barcodes.
	This menu screen is only available when Status 5 is selected for Bi-Com interface. Determines
	how the printer will react if the item number (ID Command) is set to be processed by the printer.
	•	Disable - factory default. Does nothing regardless of whether the item number is included in
		the format.
Item No. Check
Disable*	•	Cancel - errors when the incorrect item number is being accessed. When the printer is
		brought back online from the error, by pressing the Line key, the incorrect job is canceled.

•Resume - error when the incorrect item number is being accessed. When the printer is brought back online from the error, by pressing the Line key, the incorrect job is canceled.

GL408-412e Operator’s Manual 4-47