SATO GL4XXE manual Permits entry into the Diagnostics Mode

	Unit 4: Printer Configuration
	IGL EMULATION MODE (TABLE 4-14)
MENU	DESCRIPTION
	This menu saves the current state of the printer to flash memory. The pages, formats, and fields
	that currently exist in RAM memory save to flash memory and are restored at power up. This
	allows the format to be sent once and make it resident in the printer.
IGL Setup
	Note: Saving the state does not save general printer settings for which configuration menus are
Save state*
	provided. These settings are saved by storing the configuration, and selecting that configuration
	as the power up configuration. Examples of settings that can be configured this way by host
	control are print speed, print density, and media handling (continuous, tear-off, etc.).
	DIAGNOSTICS MODE (TABLE 4-15)
MENU	DESCRIPTION
	Permits entry into the DIAGNOSTICS Mode.
DIAGNOSTICS

Is the menu selection screen for the DIAGNOSTICS Mode.

DIAGNOSTICS

Priority Setting

Printer Tests

Test Count

Software Build

Hex Dump Mode

Print Error Log

Clear Error Log

Flash Installed

DRAM Installed

Ptr On Time

Printer Usage

PrintHead Usage

Head On Time

Reset Head Data

PrintHead Usage

Head Type

Head Voltage

Allows the selection of which type of programming will take priority precedence in determining Print Darkness, Print Speed, and Print Offset.

	•	Command - factory default. Any commands in the label job will take precedence and be
Priority Setting
Command*		used for printing. The LCD will reflect the new setting.
	•	LCD - Any settings established through the printer’s operator panel will be used for an
		incoming print job regardless of different command settings.

GL408-412e Operator’s Manual 4-82