SATO GL4XXE manual 5, Parallel Interface Mode

Unit 4: Printer Configuration

PARALLEL INTERFACE MODE

This chapter provides the programming sequences required for IEEE1284 interface setup. Use the keys of the printer’s operator panel to select and enter the required options.

Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.

ATTENTION: Perform the following programming sequence only if this is the interface type to be used. Instead, refer to the appropriate interface programming chart.

POWER

ONLINE

LINE

OFFLINE

Ignore CR/LF No*

Item No. Check Disable*

BCC Check

Disable*

History Buffer Temporary*

Comm. Protocol Status 5*

FUNCTION

INTERFACES

Interface

Mode

ENTER

INTERFACES

Ignore CR/LF

Item No. Check

BCC Check

History Buffer

Comm. Protocol

Host Interface

Parallel Port

USB Port

Serial Port

Printer Mgmt

Screens

only display if ENTER Admin User is

enabled within the Advanced Mode

Host Interface Auto Switching*

Parallel Port Port Type

Port Type

IEEE 1284*

Buffer Size in K 16*

Auto Trickle Disable*

Trickle Time 1/4 sec*

Timeout 10 sec.*

Report Status Disable*

Prime Signal Disable*

Offline Process Disable*

Host Interface IEEE 1284

IEEE 1284 Prime Signal

Prime Signal Disable*

TOF Action

Reset*

Buffer Size in K 16*

Offset Process Disable*

Figure 4-5, Parallel Interface Mode

GL408-412e Operator’s Manual 4-8